DTF Beechcraft bonanza with navigation lights

[81zapper]

Here is my latest project being considered for an article. It is my prototype of a Beechcraft bonanza. I wanted to try and see if I could create a navigation lighting system on my own and I think it turned out not too bad.

Click on link below

Here is a picture of the board currently in the plane eventually I will clean it up


I also had to figure out how to control an elevator that was split so I used the method in the pictures below. This seemed to work also.



I have yet to fly it so time will tell.
If there is enough interest I will write an article with plans and how I made the board for the lights

 

[Centus]

Cool lights! I would love to see an article with how you made that board.

 

[RAM]

Nice work. I'd also like to see how you did the lights. I know you can buy them fairly cheap but it's nice to know how to diy

 

[81zapper]

by the way it's just plug and play system . Put it into an open spot in your receiver and it will run Working on a pcm board soon to make it more compact and cleaner