Piper Comanche
I made a plan in inkscape and built this before, but it was plagued with servo failures. The maiden was off balance, but I fixed it and it flew great for a few minutes before a servo locked. I think that happened a few times and last one the elevator stuck full back, so it nosed in hard.
View attachment 242399
So this time Im thrilled to have the new FT water resistant white foamboard so I dont ruin the servos with excessive polyurethane. The new wing is done. I closed up the wingtips to make them glow better.
Update. Basically done. I decided to make removable tricycle gear. I designed a 3d printed steerable nose wheel mount. We will see if it works. I used Mr. NCTs mounts for the back wheels. The cockpit hatch turned out pretty good for me doing it. Im glad I didnt cut where I marked lol.