gluing delrin

[llukas11]

Hi,

I've got few questions about gluing back rotor bones delrin parts:
1. is it safe? (assuming part has a crack but not fully cracked)
2. what glue to use if?

I'd like to glue back one part from this set (top left on the image) https://store.flitetest.com/replacement-delrin-tilt-13-370/

Best regards,
L

 

[510thousandths]

Deleon and glue don't get along well. You could try and 'weld' them back together, or maybe cut a slot perpendicular to the crack, instep another piece.of feeling, carbon fiber, or something else,apply epoxy and wrap thread around the repairable the epoxy is still wet, but it will never be as strong.

 

[llukas11]

Did you try to use this? They claim it can do delrin.

http://www.amazon.com/Pacer-01-PT22-Poly-Zap/dp/B0006O8EJO

I'll probably go with replacement parts but it would be good to know if it works good.

 

[Quad]

Some good thoughts here: Some are techniques and some are glues: http://www.bing.com/search?q=delron...=-1&sk=&cvid=b46077dc94094c5fbdf19400b560b9fb

 

[cranialrectosis]

Zip ties until the wheels fall off!

Once they do:
http://rcexplorer.se/product/tricopter-tilt-mechanism-3d-printed/