Register | Help | Store Account | FliteTest Dashboard
Page 70 of 70 FirstFirst ... 20 60 68 69 70
Results 691 to 700 of 700
  1. #691
    Ultimate Cheap Skate Daniel Kezar's Avatar
    Join Date
    Feb 2018
    Location
    Southern Maine, USA (the cold place with lots of snow and moose and deer and squirrels)
    Posts
    412
    ok so heres a question.... what should i scale the power pack a planes up by and the power pack c plans down by to work well with power pack b? c pack ones to 80%? 70% a packs up to 150%? 120%?
    Major RC's in Flying Condition:FT Flyer (flown once, crashed, repaired), FT Sparrow (unpowered free flight version, flown soooo much, fixed sooo much), FT Simple Soarer (built with electronics, no motor, not flown),
    In Progress:B.A.T. 150% size (some pieces cut out, some not measured out yet), FT Simple Scout (plans taped together), FT Simple Cub (plans printed),
    Retired RC's none yet, although the sparrow is getting close.
    I also have an Axial SCX10 Deadbolt (crawler)

  2. #692
    HI, I have been trying to get the PDF plans for the Mini Guinea from the flitetest page but it says server not found. Is there any other page or here in the thread a link for me to get it?

    thank you

  3. #693
    Moderator Balu's Avatar
    Join Date
    Feb 2014
    Location
    MŁnster, Germany
    Posts
    2,985
    "My wife says this hobby is a bottomless money pit. To me it is a hobby with unlimited potential." [OH at a MakerFaire]

  4. #694
    Ultimate Cheap Skate Daniel Kezar's Avatar
    Join Date
    Feb 2018
    Location
    Southern Maine, USA (the cold place with lots of snow and moose and deer and squirrels)
    Posts
    412
    so if i only have full size plans, how can i tile then and have correct scale? also, in the index in the first post, what does the red names of certain planes mean?
    Last edited by Daniel Kezar; 02-13-2018 at 07:53 PM.
    Major RC's in Flying Condition:FT Flyer (flown once, crashed, repaired), FT Sparrow (unpowered free flight version, flown soooo much, fixed sooo much), FT Simple Soarer (built with electronics, no motor, not flown),
    In Progress:B.A.T. 150% size (some pieces cut out, some not measured out yet), FT Simple Scout (plans taped together), FT Simple Cub (plans printed),
    Retired RC's none yet, although the sparrow is getting close.
    I also have an Axial SCX10 Deadbolt (crawler)

  5. #695

    Join Date
    Sep 2013
    Location
    South Bend, IN
    Posts
    669
    Quote Originally Posted by Balu View Post
    Balu, the link only shows one page of full size and only one page tiled plans when I checked it also. Weird, I thought it would have the complete PDFs instead of only one page. There is also a request on the Mini Guinea thread, so I was going to reply with a link to your post. But I thought let me check the link just in case. I don't remember encountering that issue in the past with the web archive. Any thoughts?
    Enjoy a blessed day!

  6. #696

    Quote Originally Posted by Michael763 View Post
    Balu, the link only shows one page of full size and only one page tiled plans when I checked it also. Weird, I thought it would have the complete PDFs instead of only one page. There is also a request on the Mini Guinea thread, so I was going to reply with a link to your post. But I thought let me check the link just in case. I don't remember encountering that issue in the past with the web archive. Any thoughts?
    Thank you so much its help me alot

  7. #697

    Ben Harber plans F4 Twin 70s

    I am new to scratch building and flying in general but I really like the two EDFs Viggen and X29 that I have already built. I saw the Ben Harber F4 Phantom and would like to give it a try. The title shows up for the the EDFs designed by Ben Harber but nothing happens when you click on them. I noticed the Buggati plans have an area under them that opens the plans up for printing. Are the EDF plans not ready yet or am I messing something up. If at all possible I would really like to give building the F4 a try. If am doing something wrong or if their is some way I could get a set of plans for the twin F4 or any of the EDFs Ben Harber has designed I would appreciate it. My email is: copout162@yahoo.com Thank you.

  8. #698
    Ultimate Cheap Skate Daniel Kezar's Avatar
    Join Date
    Feb 2018
    Location
    Southern Maine, USA (the cold place with lots of snow and moose and deer and squirrels)
    Posts
    412
    Quote Originally Posted by copout162 View Post
    I am new to scratch building and flying in general but I really like the two EDFs Viggen and X29 that I have already built. I saw the Ben Harber F4 Phantom and would like to give it a try. The title shows up for the the EDFs designed by Ben Harber but nothing happens when you click on them. I noticed the Buggati plans have an area under them that opens the plans up for printing. Are the EDF plans not ready yet or am I messing something up. If at all possible I would really like to give building the F4 a try. If am doing something wrong or if their is some way I could get a set of plans for the twin F4 or any of the EDFs Ben Harber has designed I would appreciate it. My email is: copout162@yahoo.com Thank you.
    lol "new to scratch building" and "two edf viggens and X29" dont really go together. i think you are more than new to it haha. you certainly are a more skilled pilot than me!
    Major RC's in Flying Condition:FT Flyer (flown once, crashed, repaired), FT Sparrow (unpowered free flight version, flown soooo much, fixed sooo much), FT Simple Soarer (built with electronics, no motor, not flown),
    In Progress:B.A.T. 150% size (some pieces cut out, some not measured out yet), FT Simple Scout (plans taped together), FT Simple Cub (plans printed),
    Retired RC's none yet, although the sparrow is getting close.
    I also have an Axial SCX10 Deadbolt (crawler)

  9. #699

    Join Date
    Oct 2017
    Location
    Cape Town, South Africa
    Posts
    7

    Mini Guinea Tiled Plans

    Quote Originally Posted by Balu View Post
    Hey Balu,

    I'm looking to build my first twin plane so I'd also love to get the tiled Mini Guinea plans.

    I also want to attempt a Mini Sea Duck, any advice on what percentage to scale down?

    Thanks
    Mojo

  10. #700
    You havenít seen me fly yet lol, and letís face it flite test with the plans and build videos they put out pretty much build the planes for you I just buy the materials and follow along it also helps bring retired and living within walking distance to a dollar tree store. I donít think the F4 will be that simple.

Page 70 of 70 FirstFirst ... 20 60 68 69 70

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •