Register | Help | Store Account | FliteTest Dashboard
Page 2 of 2 FirstFirst 1 2
Results 11 to 16 of 16
  1. #11
    Air-headed Aviator's Avatar
    Join Date
    Jun 2017
    Location
    Dallas TX/Arlington TX
    Posts
    13
    What kind of speed are ya expecting from this rockyboy?

  2. #12
    Skill Collector rockyboy's Avatar
    Join Date
    May 2015
    Location
    Alexandria, VA USA
    Posts
    2,272
    Speed wise, she goes faster than my thumbs do on 3s - I don't have the nerves to try 4s on it. Probably only in the 60 mph range with 3s and 7x5 prop - with a more aggressive prop and 4s and the laminating she should do 90. Laine says the balsa ones will do 120 with appropriate encouragement.

    Laine also helped me check out the setup and get it trimmed out - it's very handy to have the designer present for the maiden flight - I highly recommend it! Flies great - tracks where you point it and screams as it flies by

    Joker, I'll look up the specific laminating video I followed - it was from Mrs. FlashGangster following the technique she showed Bixler in Texas.

    Basic steps are: paint epp, spray with 3m77, apply pinstriping, then apply doculam.

    It doesn't stretch around compound curves (like wing tips) at all, but when sliced and overlapped, the seam almost disappears when heated.
    We want YOU to be in the 2018 FF WWII Community Design/Build Challenge!

    My hanger listing, build threads, conversion projects, and Taranis radio mods are Over Here....

  3. #13
    A thousand pints of lite. Joker 53150's Avatar
    Join Date
    Aug 2012
    Location
    Muskego, WI
    Posts
    2,500
    Thanks, I'll check it out.

    After seeing what Laine did to two Cuda's at Flite Fest I think it's safe to say they'll easily do more than 100 MPH! That kind of speed straight down into the ground made for an impressive crater!

    My EPP Cuda will be built with his recommended electronics, using a Fun Fighter motor capable of 3S or 4S. If you've got it set up and stable at full speed on 3S, you'll really need to try it with 4S. The first few times I did that with a Fun Fighter I was shaking during and after the flight, but the speed is addictive and now 3S just feels boring! Running the Fun Fighters at Flite Fest was like going to a drag race in a "sleeper" car. People didn't expect much out of it and were amazed at just how fast it went!
    Joker

    Balsa dust is a wonderful thing, make some today!

  4. #14
    Skill Collector rockyboy's Avatar
    Join Date
    May 2015
    Location
    Alexandria, VA USA
    Posts
    2,272
    I'm still skeered of this thing on 4s.... But, I have this 4s1800 sitting with me that's almost the exact same size and weight as my 3s2200.... and it doesn't look too evil all by itself....


    Also, it turns out the video I was thinking of is the very same one @CrashRecovery mentioned

    We want YOU to be in the 2018 FF WWII Community Design/Build Challenge!

    My hanger listing, build threads, conversion projects, and Taranis radio mods are Over Here....

  5. #15
    Fly Angry PsyBorg's Avatar
    Join Date
    Jan 2016
    Location
    Upstate New York
    Posts
    3,812
    Ok it looked all tasty in the first post.. now ya had ta go and paint it an all melty chocolate brown.. I was wrong it is not a stale peep it is a full on smores.. Now I must go find something chocolate to eat..

    Is this the one you had hanging in Laines Booth?
    BILLS LAW: Bills Law specifically states that it covers ANYTHING that Murphy may have forgot, omitted, or plain didn't know in the first place. There fore if it can happen it WILL happen to ME.

    Psyborg FPV You Tube channel.. https://www.youtube.com/channel/UC88...L6-KC9qTa2LgVA

  6. #16
    A thousand pints of lite. Joker 53150's Avatar
    Join Date
    Aug 2012
    Location
    Muskego, WI
    Posts
    2,500
    Thanks for the link, I'll have to do a little planning before getting it started!
    Joker

    Balsa dust is a wonderful thing, make some today!

Page 2 of 2 FirstFirst 1 2

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •