Register | Help | Store Account | FliteTest Dashboard
Results 1 to 6 of 6
  1. #1

    Smile RC Plane Scratch build- Trainer type, pusher and KFM wing




    Hello Friends,

    This is about my first scratch build plane. The full article is at

    https://www.flitetest.com/articles/r...g-kfm-airfoils



    Happy Flying.
    Last edited by waghoba; 10-30-2017 at 10:06 PM.

  2. #2
    Watch the full flight here..

  3. #3

    Join Date
    Nov 2016
    Location
    Germany
    Posts
    877
    Nice. Congratulations ��

  4. #4

  5. #5
    Congratulations!
    Last edited by wayne8; 11-27-2017 at 02:58 AM.
    GoMovies - Watch series online
    192.168.0.1 wiki router

  6. #6
    seems like you have built a pretty strong little trainer. Try not to maiden planes unless you have gotten the CG correct or just a tad nose heavy to be safe although i think some of the plans may have them slightly nose heavy to begin with.

    Not sure how a control horn came loose, if your using those plastic clevis's that dont clip together its usually a good idea to use a small rubber band to hold them together. or you had a control horn pulled out the control surface just make sure it has enough hot glue

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •