Register | Help | Store Account | FliteTest Dashboard
Page 2 of 2 FirstFirst 1 2
Results 11 to 13 of 13
  1. #11
    Fly Angry PsyBorg's Avatar
    Join Date
    Jan 2016
    Location
    Upstate New York
    Posts
    4,994
    Using foam tape to shock mount the FC and then hot gluing it tight again defeats the purpose.

    Instead of all this back and forth post up some pics for various angles and video as well as a screen shot of your pids and rates like I did please. I want to see the video so we can determine what the conditions we are fighting look like. The yaw twitch is pretty obvious but inside or outside should not be effecting it so I think we are talking two separate issues.
    BILLS LAW: Bills Law specifically states that it covers ANYTHING that Murphy may have forgot, omitted, or plain didn't know in the first place. There fore if it can happen it WILL happen to ME.

    Psyborg FPV You Tube channel.. https://www.youtube.com/channel/UC88...L6-KC9qTa2LgVA

  2. #12
    Yeah I glued down the FC because someone else on YouTube had a similar issue and that worked for them. https://www.youtube.com/watch?v=sCLuLCvlvFE

    Through all my testing the only thing that really seemed to have an effect was loosening the screws on the motor. I had some thicker foam left over that FT sent me with my stuff (A black piece with some adhesive on one side - TJ didn't use it in the build video as far as I could tell so I'm not sure what it was supposed to be for). I cut that into squares and put it under each motor. Now it works, even outside!

    This still seems weird to me though so I'll try to get some better pictures and video. Unfortunately it's dark by the time I get home from work so it'll probably have to wait until the weekend. There's lamp outside that I've been flying around but I don't think it's bright enough to get good video.

    That being said, there's almost no wind in the spot that I'm testing in. It's a pretty small, enclosed space with the building on one side and trees on the other sides. We'll have to see how it performs when I take it to a larger space.

    Anyway I'll try to get back with some better pictures and video this weekend. My friend's Gremlin that we just built does the same thing to a lesser extent so I'll try to get a video of his.

  3. #13
    Fly Angry PsyBorg's Avatar
    Join Date
    Jan 2016
    Location
    Upstate New York
    Posts
    4,994
    What protocol did you set up for the FC and the esc's? Are you running on Dshot by chance?
    BILLS LAW: Bills Law specifically states that it covers ANYTHING that Murphy may have forgot, omitted, or plain didn't know in the first place. There fore if it can happen it WILL happen to ME.

    Psyborg FPV You Tube channel.. https://www.youtube.com/channel/UC88...L6-KC9qTa2LgVA

Page 2 of 2 FirstFirst 1 2

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •