- Type
- 3D Print Files (STL, G-code, etc.)
Mini Control Horn STL
Designed By: Dan Sponholz
Designed By: Dan Sponholz
3D printed control horn for use on most Mighty Mini-sized FT models.
Print Settings:
Material: | PLA+ (eSun) |
Layer Height: | 0.20mm |
Supports: | None |
Rafts: | None |
Infill: | 20% Grid |
Perimeters: | 2 |
Top Layers: | 5 |
Bottom Layers: | 4 |
