- Type
- 3D Print Files (STL, G-code, etc.)
I’ve added a mid and low version depending on how your motor sits.
This is solely made to improve the aerodynamics of the FT Mini Mustang, if you are going to use this, you will have to place the esc where it will get good airflow, as this part blocks airflow to inside of fuselage.
It will fit up to a 2306 motor
This is solely made to improve the aerodynamics of the FT Mini Mustang, if you are going to use this, you will have to place the esc where it will get good airflow, as this part blocks airflow to inside of fuselage.
It will fit up to a 2306 motor
