So, I was messing around with the "Edit Plane" Function on Realflight 7.5 and noticed that I could change the wing size. I got out a Piper Cub and set wing size to max (787), which I am assuming is inches. I did not change any other proportion of the airframe, so the wings were a bit oversized...
Don't worry guys, the 2D 3D Plane v2 is being worked on :P. This is a short random video of driving my Rustler over the dead corpse of my old prototype plane :rolleyes:. If you want to see the plane in action here's the video:
Don't worry guys, the 2D 3D Plane v2 is being worked on :P. This is a short random video of driving my Rustler over the dead corpse of my old prototype plane :rolleyes:. If you want to see the plane in action here's the video:
Here is a video around my club in California, its in a really beautiful spot! Recently I discovered that I had a local RC Flying club with an airstrip. Instantly, I wanted to find out how I could get involved. We visited the field, and it was amazing. I’ve never belonged to an RC Club before...
Recently I discovered that I had a local RC Flying club with an airstrip. Instantly, I wanted to find out how I could get involved. We visited the field, and it was amazing. I’ve never belonged to an RC Club before, and everyone there was really nice and helpful. I wish I had found it sooner!
This is my flat-design 3D plane based on the popular flat flying smaller 3D planes on the market. Wingspan is 30 inches and it is a blast to fly! Good for small spaces. A small project I have been working on in my free time. I am using a brushless 1900kv Blue Wonder with a 3 cell battery, has a...
This is my flat-design 3D plane based on the popular flat flying smaller 3D planes on the market. Wingspan is 30 inches and it is a blast to fly! Good for small spaces. Enjoy!
This video of my maiden was pretty catastrophic... as in, wing failure and skydive ;). Enjoy!
Notes on plane: it was a bad design in the first place, the wing was very weak, and couldn't withstand its own weight in a dive :P. I had intent on scrapping it, but decided to maiden it first, to get...
I recently noticed that the 'Show us your maidens' thread was a bit full.. Feel free to post any maiden flight of yours to this thread! This video of my scratch built maiden was pretty catastrophic... as in, wing failure and skydive ;). Enjoy!
Notes on plane: it was a bad design in the first...
GIMBAL STABILIZED
A Drone's Eye view of the Agoura High school fireworks show. Sorry for the quality of the video, the Phantom's camera does not adjust well to low light. Surprisingly, there were 6 TOTAL Phantoms filming the event, all at different altitudes and positions. This is probably the...
What I am doing when not flying RC planes or if it is too windy:
Sorry about the quality! My friend edited this on windows movie maker with a crappy camera..
Just some fun messing around with my Ultra Micro FPV in the backyard. Believe it or not, I used a Syma X5C to capture this. I used the Hobbyking HD wing cam and mounted that on the bottom with my FPV gear on top. It was a little underpowered, but I got some cool footage. Usually without the...
This is a small overview and flight video of my scratch-built trainer. I may make kits if I get enough requests for them. I will also eventually post an FT Article about this plane. Stay tuned!
This is a small overview and flight video of my scratch-built trainer. I may make kits if I get enough requests for them. I will also eventually post an FT Article about this plane. Stay tuned!
Supplies for Simulator Fun:
1. Evening with nothing to do
2. Simulator
3. Friend who can't fly
4. Remote control DeLorean
5. Aircraft Editor
If you have these items please, do not use them in this way!
Disclaimer: I don't give two busted Quads what the heli you do on your simulator m8. As long...