biplane

While I've been waiting on parts for my Hot-wire cutter for my JU-52 project, I've decided to take on a home project- The CR. 42 Falco has been a magnet to my eye for quite some time now, and ever since I built my Brewster Buffalo, I knew I'd want one as its adversary. I followed a very...

I decided to start building a depron biplane using the known flitetest build techniques. searching the internet on how to construct a biplane the right way, I found several differtent aspects to be important: size and angle of the horizontal stabilizer angle of main wings angle of thrust...

RC electric semi scale model aeroplane of 1916 De Havilland DH-2 using Flite Test building technique. For 3 view scaled up drawings goto DRG link https://drive.google.com/folderview?id=0B_ei8x6dMWOlU3lHaVUwdHdiV00&usp=sharing Goto https://youtu.be/5GmwJjam0lQ to see my RC electric semi scale...

Here is my attempt to make a biplane out of the Flite Test Mini-Scout. The wing span is barely over 24" and 5 31/32" wide. I stretched the fuselage a little. I also changed and enlarged the tail feathers a little bit. The bottom wing has 1 43/64" of dihedral. The top wing has no dihedral, but is...

Winter is here! And the "here" is Ohio! Insert appropriate cuss word. I prefer flibbatteefloo. I started on this last Saturday morning. Drew up the plans a week before that and I finished the build last night. I really like the styling of the Pitts biplane, so I thought I'd try to make...

Hello again all. I decided I should post my Jenny build to the forum. Alas, I have no in progress photos, but a few good ones of the completed model. I've done a few high speed taxi tests (Something you do on a full size airframe that so few modelers seem to duplicate.) and decided my rudder...

So a while ago I decided to try and make some plans for a swappable, and I went with the Heinkel HE 51. Why an HE 51? Idunno, seemed like a good idea at the time. This is the first finished version, feel free to download and build the plans. If you encounter a problem building or flying it...

A scratch build I put together then accidentally left hanging in my old apartment. I am planning on building it again and figuring out details. Some advice I would love to hear is four or two ailerons and symmetrical vs asymmetrical airfoil

I am a begginer and i am looking to buy an easy to fly aerobatic or 3d plane It should be crash resistant as i might crash a lot. It should be around the 100-200 dollar range (i have my own transmitter and reciever but everything else should be included in the cost) These are the planes that i...

This is a scratch build biplane I built. after watching some builds on flight test.

Official Flite Test Build Log & Review Hobby King - DH Tiger Moth RAF 912mm (PNF) by: Eric Monroe (shadow74) The Tiger Moth can be best described as Iconic, it was developed from the very succesful Gipsy Moth and designed by Geoffrey De Havilland in the 1930s to meet Air Ministry...