charger problem

  1. N

    Help! Imax b6 charging issues

    Hello, I've had this charger for a few months now and it has always worked perfectly. Once, I tried to power it from a 3s liion at about 12.2V. I'm pretty sure that I did not reversed the polarity, but anyway there was a big spark when I plugged in the liion and some smoke went out. After that...
  2. N

    Battery Charger Issue Model: EcoPower Electron 44AC ECP-1006

    Hi, I have bought an Electron EcoPower charger and I have stupidly lost the manual and when I'm trying to charge my DualSky 1300mah 3 cell battery all 4 LEDs on the charger flash red and I'm unable to find a manual for it online I also have just purchased a new 2 cell 1500mah LiPo and I tried...
  3. R

    Problem with B3 PRO Compact Charger

    HI to everyone! I have a problem with my charger. When I connect it to power I expecting that the three LEDs that indacate the ''charge status" of each cell are/became green, which indicating that the charger works properly but this non happens. Two leds remains red and only one is green (the...
  4. P

    Turnigy Accucel-6 amps

    So I've tried a computer power supply and a car battery and the power is not the issue. When I set the charger to 6 amps it will only charge at 4 to 4.2 amps. Why is this happening? Has anybody else had this problem?
  5. K

    Turnigy Accucel-6 50W 6A Balancer/Charger problem

    Hey I bought the Turnigy Accucel-6 50W 6A Balancer/Charger from hobbyking to charge the batteries for my bixler that I also ordered from hk, but the charger doesn't really work how it shoud or I am doing something wrong When I'm trying to charge the batteries, there comes the error "BATTERY...