Hello All!
Like many, I've found that simulators are infinitely more entertaining when you have an actual flight stick or controller to connect to your computer. Being a college student, cheap was the name of the game for me so my initial flight stick was rather bare bones. (seen below) To...
Hello All!
Like many, I've found that simulators are infinitely more entertaining when you have an actual flight stick or controller to connect to your computer. Being a college student, cheap was the name of the game for me so my initial flight stick was rather bare bones. (seen below) To...
Title pretty much explains it, I'm looking for a simple way to get the RSSI signal from FrSky receivers onto my video signal. I've done it on one of my miniquads using the Betaflight F3 board and its built in OSD, but I'm looking for something to use on flying wings and quads with cheap fc's...
Hello, all!
I would like to present to you my first of two designs - the LuteFisk. This is a high-performance 1.1m2 wing that will rival most other single-skin R/C Paraglider / Paramotor wings available on the market. I have spent the last few years developing (and mostly failing) this wing and...
Hi, guys! im new to the flight test forums (although not new to forums in general) but i hear that this is the place to be. I need help finding a flight controller that is compatible with a drone design i am looking to build. Actually, any suggestions would be great, i had a versa-copter but i...
FT spitfire fpv "Air racer" I am making a ft spitfire with an air racing paint scheme based on an assortment of paint schemes. This aircraft is going to be used for fpv with a fpv pod but will also be flown line of sight. anyway here are the
(more info coming soon on the forum and on my website...
Hello,
Recently I was able to get my Gremlin up and flying. Quad is super quiet and is very smooth. I thought I would be ready to FPV, but it turns out my camera is having issues sending signal to my goggles. I currently am using the Fatshark Teleporter V4s that were sold under Horizon Hobby...
I wrecked my apprentice hard (again) and after lots of chopsticks epoxy hot glue and tape I'm just about ready to get it in the air again. Except that I threw away the tail thinking that I had a template to make a new one from foam board which I've done a couple times. Last time I needed to put...
Good Evening All,
I always wanted a tray radio because I fly with the "pinch" technique. I've been eyeing up the Taranis X9E for a while, but I can't really shell out the cash. I also considered buying a tray for my Spektrum DX6i but those seemed cheap and flimsy. So I went into my garage...
Hi, guys! Big fan here. I'm a n00bie when it comes to flying rc model aircrafts. My limited experience it's with a second-hand quadcopter which I've bought last year from a rc-flohmarkt in Germany(I'm from Romania,btw). Last time when I've tried to fly my quad it was all good, but the big...
I thought I'd share this with the FT community.
I'm nearing the end of a build of a weather station for my local club. We are in a location with no power or WiFi, so this is a DOLRAM station:
Dirt Cheap
Off-grid
Low maintenance
Realtime
Atmospheric
Monitoring
Project details on my personal...
Frustrated at keeping a consistent depth, I decided to make a tool that would hold a razor blade at the perfect angle. Works very well, might make one for making edge bevels.
http://www.thingiverse.com/thing:2158247
https://www.youtube.com/channel/UC5kJonpYCcV3-cFApGVIM0Q
This is the first of many parts, after this failure I am more motivated to get this thing to fly! I plan to use some 3D printed parts for the fuselage and upgrade the power system a bit. I'm really excited about this project and would...
Have a scratch-build you need to put tricycle landing gear on? Here is a quick and easy solution! If you follow this step by step guide, you will end up with a landing gear setup below:
____________________________________________________
What you need:
First, trace your 5-9 gram servo...
(Part 1: Fast & Cheap DIY airgates)
When trying to improve your skills of flying a micro quad, nothing compares to flying in a more restricted, tight and challenging route. In other words, some kind of a race course.
This is where airgates come in handy. Gates which you can move around and...
The last couple of months I was working on a new frame design. I wanted to make a very light and yet a very strong frame! The whole frame is made out of 4 mm carbon fiber and weights only 90 grams! Watch this video to see how the frame comes to life!
A while back I crashed and damaged my Parkzone P-51D with AS3X's air frame. With little to no knowledge on how to repair something small and of that nature, I want to take out its electronics and build a flyer that if possible could use all 4 available channels, but be easy to build for a broke...
Hey all,
I've been into RC for a bit now, but have just recently started building my own aircraft. I decided to try out the FT Delta before getting into regular wings, and it came together very nicely... However, the only way I can get it to balance out correctly is if the battery is mounted at...
I would would greatly apreciate advice on which FPV Gear to buy/getting into FPV
Hello, I'm 22 and I live in the Pacific North West. I've been flying RC ever since I was a kid and I've been interested in getting into FPV for a long time now, but it always seemed a little bit too technically...
Hi everyone!
I'm new to building multirotors, and I am afraid of making a mistake and wasting my money.
That is why I came here in search for help, you see, I'd like to build a hexacopter with the following features:
- Medium size frame
- 10 to 13 inch propellers (preferably T-mount 10x5.5...