esc

  1. S

    PLEASE HELP ME WIRE MY GIANT MOTOR AND ESC!!!

    Hello There! This is my FIRST POST EVER and I am usually a secrete post reader and I am on this forum everyday. I am a test pilot and electrical system coordinator for diesel and turbine motor drones. I also fly rc planes and AP quads and a lot of FT planes. ANYWAY. I just came across a...
  2. Snarls

    MiniQuad ESC Prop Strikes

    Recently I have been noticing slices in the heat shrink around my ESCs, and it's not just one ESC, all of them seem to have been hit in some way. My ZMR250 has the ESCs mounted on the arms which is great for active cooling, but puts them in danger of prop strikes. I figure the problem is that...
  3. W

    1st Electrohub build confusion

    Sorry to be a bother, two areas I am confused on Electrohub Spider build with RTFQ kits: 1. Was I supposed to solder two of the motor leads flipped to get the twp that spin in the opposite direction, or is it based on the port the ESC's connect to? 2. Someplace, I thought in the FT Build video I...
  4. A

    Emax SImonK ESC

    Hey guys, I recently purchased an EMAX 12A ESC for my FT Mini Scout and can't get it working. I previously had a Turnigy plush 12A which worked just fine but I destroyed it one day by shorting it... The problem with the new ESC is that, when connecting the battery I don't get the usual series...
  5. M

    Question on motor, esc, prop, combo for my FT Mustang

    Just built my second FT plane, the Mustang. I love it. Thanks FT guys! I do want to get a bit more speed. Presently I'm running a Suppo 2217/7 1250KV, Suppo 30Amp esc and a 9 x 4.7 prop. I'm considering changing it to a Suppo 2217/6 1500KV (...
  6. D

    I need advice for teksumo parts like a motor and additional build tips

    Im new to the hobby and am building a new plane, just a stock teksumo. I got a 30 amp plush esc, a neewer tx/rx a 2200 mah 3s lipo, 2 9g servos and am pondering a motor suitable for the setup considering the 30 amp esc. Any reccomendations? I also want some build tips regarding electronic...
  7. C

    Wiring and ESC's?

    Hi, I am building a Tarot Iron Man 650 quad for AP. Im using 740 KV motors with 30A ESC's. I was wondering about power distribution, would it be ok to solder the wires together or would that cause heating issues? I was looking at some of hobby kings power boards, but iv heard they get very...
  8. D

    Seriously annoying ESC problems

    Help is needed! I have nearly finished my not so fancy kk2 quad and on its maiden, one of the motors stopped turning. I needed to push it a little to get it going, otherwise it would just wiggle, and I also need to move my throttle nearly halfway up to start the motors. Im using the reccomended...
  9. S

    Combining Multistar v1 and v2 ESC's

    I'm looking for some guidance as I start to build a new quad. I have three 15 amp version 1 MultiStar ESC's from an older Tri-copter and purchased a version 2 15 amp MultiStar ESC that is loaded with BLHeli. Will I be able to use the three older and one newer together? If not, what if I...
  10. B

    New Quad problem. motors? escs? fc??

    Did my Flip32 S**t the bed??? or the motors/esc's??? Hey guys! Im new to the multirotor world, I just built my first quad and finally got it up in the air the other day with zero issues without any tuning. but after my first flight i ran into some (what appears to be) serious issues. if you...
  11. L

    Are there any decent 4in1 escs out there?

    I'd like one that can run SimonK or BL Heli I haven't found any good candidates so far RTFQ has some but, it's been 3 weeks and I've heard nothing so I'm not optimistic about that option, and this one has terrible reviews...
  12. T

    Help for ESC available in the Shop !

    Hello, I have a question about the ESC that you provide in the https://store.flitetest.com/power-pack-d-standard-quadcopter/ powerpack D for quads ? Do they all have a BEC ? Is it better if only one of them as a BEC ? Can we remove BECs ? What is UBEC ? And another question : are the...
  13. T

    D - powerpack ESC

    Hello, could you tell me a bit more about the ESC that you provide in the https://store.flitetest.com/power-pack-d-standard-quadcopter/ powerpack D for quads ? Do they all have a BEC ? And another question (I'm kind of new here so I want to be sure) : are the compatible with every Flight...
  14. T

    Only one motor rotates (Multiwii)

    Hello! I am trying to set up my Mini MWC Flight Control Board (from HobbyKing). I use the firmware Multiwii 2.4 from site https://code.google.com/p/multiwii/. When I plug the battery, only one motor rotates - that one that is connected to the port D3. How can I make all motors rotate? Could...
  15. Robbie

    Rotorgeeks - Brilliant company!!!!

    Hey Guys, I would like to just say, i got a quad back of 30A ESCs from Rotorgeeks which flew well, however the on one with the bec, the bec didn't work, (it should be noted the ESC still took signals from the Naze fine). I exchanged a few emails to David Klein in customer service, where he...
  16. Robbie

    What would you say the upward Ampere tolerance of 18A kiss ESCs

    To run cobra 2208s 6045 4S is quoted by RotorGeeks at 24As of current at 100% throttle, i am curious to see whether Kiss ESCs could take this or more?
  17. jaskoller

    Programming ESC With Programmer

    Ok, I'm back again. I appreciate all the help I've gotten so far. I've searched this forum and web and have found no real definitive answers. On my Tricopter (David W's tricopter design) I'm using the following: ESC's: (HK 20amp) ESC...
  18. P

    Fried ESC?

    Hey everyone, tl;dr 1. Lost radio signal, plane crashed, servos jittering uncontrollably, ESC very hot. Did my ESC overheat and shut off, taking the Rx with it? 2. Can you recommend any motors that will provide lots of punch for the Versa and Spitfire? Video of servo jitter...
  19. A

    naze32 won't lift

    Ok guys I'm new here but been doing multi rotors for a while now. I decided to go from a naza lite to a naze32 acro. I got everything soldered and did the basic setup like on these guys video and most on youtube. For the lift of me I can't figure out whats going on. Even in rate mode...
  20. marktbaldridge

    Problem setting up LazerToys ESC

    I'm having a bit of a problem with a Lazertoys 30A ESC. My friend actually bought it with "THE BEEF" package, but could never get it to work. I traded him one of my hobbyking ESCs to use, and he was happy with that. However, I'd like to use this ESC that I now have, but it's really confusing...