flip 1.5

  1. B

    MWC Flip 1.5 with Fly Sky Radio

    Hello, I'm trying to build my first quad and I'm running into issues getting the receiver to communicate to the Flip 1.5 FC. I have the FC connected to my computer and running the MWC v2.3. I can see all of the telemetry data coming back, roll, pitch, yaw, but none of my radio controls show...
  2. D

    Flip 1.5 issues!

    Hi folks, I have looked at a heap of posts and cannot find an answer to my problem so I appologise if it has been covered before. I have just completed my first build of the FT Electrohub with the flip 1.5. I am using a turnigy 9x controller and receiver. When I calibrated the esc's they...
  3. R

    DX4e and Flip 1.5 MWC?

    I am helping a friend of mine build a quad copter and he is trying to stay on a low budget. He wants to use the flip 1.5 flight control board. I have a dx4e sitting around that I am never going to use again that I said he could use. Will they work together? I know that in the set-up process you...
  4. S

    electrohub, flip 1.5 programing with a mac help

    Hi guys, just bought my first quadcopter, its an electrohub kit, and im in the process of ordering the rtfq electronics, pimped out 1.5 flip, f-30A speed controllers, 4 pack t2212-980kv motors, propellers, harness, receiver cable etc. Should i get a normal lemon receiver? side pin or end pin...
  5. G

    Noob needs help with with flip 1.5 programing

    I received an electrohub kit for Christmas. Over the past few days I have built my electrohub, had my first flight and first crash following an out of control encounter with a tree... 2 broken props and 2 split booms later I decided to check over everything to make sure it was my terrible pilot...
  6. L

    Radio settings for flip 1.5 using DX6i

    Hello All, Doing first multirotor build with my son. Did the Electrohub kit with RTF build kit including the 1.5. for Quadcopter. Everything went together well, but we are having electronic issues. I believe we need the correct settings for the DX6i. I have not been able to find them as the...
  7. A

    Electrohub Flight Characteristics- Throttle response/altitude

    I built an Electrohub up from the show using the kit from ready to fly and I use it for LOS flying to take video. Most of my flying is done in ANGLE mode. I am Using a DX6i radio and AR6210 rx and a 3s 2200 mah battery. Multiwii Flip 1.5 with gps/baro addon. I have balanced the props. I added a...
  8. T

    Need help getting Flip 1.5 to talk to Mac

    Does anyone have any ideas on how to get my Mac to recognize my flip 1.5 board? I looked on ready to fly quads and tried to find a usb driver but the link to Dropbox is no longer available. I am new to all of this and want to double check the settings. Any help would be much appreciated.
  9. Mastrmindz

    Problems Communicating with Witespy aka Paul Baxter aka RTF Quads

    Hey FT. *I am reposting this thread to this section under recommendation under one of the moderators.* I have a problem and I am hoping you can help me out. (I am not sure this is the right forum topic for this issue, but it is slightly related to customer support). I have been in the hobby...
  10. Mastrmindz

    Problems Communicating with Witespy aka Paul Baxter aka RTF Quads

    Hey FT. I have a problem and I am hoping you can help me out. (I am not sure this is the right forum topic for this issue, but it is slightly related to customer support). I have been in the hobby for a few months now. Back in late May, I had to replace my KK 2.1 board and decided to go with...
  11. RoyBro

    Flippin' Confused

    I've been hearing more and more about the Flip 1.5 from Ready To Fly Quads recently. A $15 flight controller sounds great, so I went to the website and saw more than just the Flip 1.5. There's the Flip 2.0, 2.5, Pro, 32, 32+, and Ez. Can anyone help sort all this out? :confused: BTW, does...
  12. rcflyer729

    need help with flip 1.5 flight controller

    I need some help with flip 1.5 flight controller. Please watch this video and post comments bellow. thanks