• This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn more.

flysky i6

  1. kilroy07

    Part 3D printed FLYSKY i6 (i6-X) field-box Protector 2.0

    I use a plastic tub for my field box and got worried about my transmitters just bouncing around in there. So here's my design for a drop-in protector for the FLYSKY i6 line of transmitters. You can find it here on thingiverse; (Forum says file is too large...)...
  2. J

    Help with connecting Eachine i6 to simulator

    Ok, so I got a falcon 250 pro from eachine, and it came with an eachine i6 transmitter. Now I want to connect that to the DRL simulator. I got a dongle (22 in 1, from banggood) and installed an SI driver (silicon labs I think?) and finally got the game to recognize a controller. I think that my...
  3. M

    Flysky i6 into a 10ch ibus MONSTER!!

    I've learned so much from the users here that I thought It was time for me to share something I recently figured out about the o so popular Flysky i6. A little back story on the i6. I purchased mine in late 2014 and it did not come with the firmware for ppm output on the fs-iA6B receiver, which...
  4. P

    FlySky/Turnigy i6 Programming tips...

    The Flysky/Turnigy i6 has a few quirks in its menu system. Thought I'd share the few I have found This applies to Firmware version 1.1 9-Jan-2015 running on a Turnigy TGY-i6. 1. The TX displays the currently selected model's Information screen. A long press "OK" gets you to the programming...