Hello all,
My 1.3GHz system from FoxTechFPV.com is set up on the test bench, and I've been able to successfully transmit video from the transmitter to the receiver and view it on an old Audiovox 7" monitor from a dual monitor portable DVD set.
Unfortunately, my camera has not arrived so I've...
I am building a new ground station and need to know if my plan will work. (Before I burn something up)
I have a 19" LED TV that came with a power brick to turn AC into DC power (Like a laptop power cord). It has it's output listed as 12V 3A and the TV uses 24-30 watts. Instead of using the power...
I am building a new ground station and need to know if my plan will work. (Before I burn something up)
I have a 19" LED TV that came with a power brick to turn AC into DC power (Like a laptop power cord). It has it's output listed as 12V 3A and the TV uses 24-30 watts. Instead of using the power...
I want to run a 19" LED TV on 3300mAh 3cell LiPo. The TV has a power brick that says the output is 12v 3A so I purchased a 12V 3A UBEC to put between the TV and the LiPo. The specs on the TV say it will pull 24Watts with a max of 30Watts. I have listed the links to all the parts used below. Does...
Hi everyone, just thought I'd quickly share my SUPER basic FPV setup.
I was trying to think of ways to make a cheap FPV helmet in order to start flying fpv with my new Bixler, and as my budget doesn't really stretch to FatSharks at the moment, I came up with a small monitor strapped onto an...