gimbal

Hi all, I am looking for GoPro gimbal suggestions for a SunnySky X2212 KV980-powered Electrohub tricopter (3S 4000mAh). This will need to mount on the FT FPV Rail System. Certainly this has been covered before, but there is always some new offering, and I'm confused because some of them...

Hey everyone, I thought I should share my build here to get some feedback and hopefully inspire others to build their own DIY equipment. I am currently working on a mini gimbal to compactly stabilize my GoPro Hero 2. The goal is to mount the gimbal on the end of an extendable pole to use for...

I took and edited this video over the past couple weeks and it is finally completed. It is my first video done for a business. The video is of my local golf course and was filmed using a Cinetank Mk2 and a Tarot 2 axis gimbal. Please enjoy the video!!

I spent a few hours taking video and editing it for a promotional video for a local golf course. Check out the video, hope you enjoy it. The video is taken with a Cinetank Mk 2 quadcopter, and a tarot 2 axis gimbal with a Gopro hero 4. Thanks.

I got out the other night and did some more work with the gimbal, as well as shot a quick video without it. The gimbal is a Tarot 2D gimbal, and I am flying it on a Cinetank Mk II quadcopter. Thanks for watching!

Here is my first video using the Tarot 2D gimbal. This is mounted horizontally on the front of my Cinetank Mk2. The gimbal is working pretty well so far and really smooths out the video. I am running a seperate FPV camera (Fatshark 600TVL) so I can still see the quadcopter tilting, which means I...

I just got the RTF gimbal from RTF quads ( http://www.readytoflyquads.com/rtf-all-in-one-gimbal ) It never worked from the start, it had a solid blue and red light and a blinking green. No other indications that it was plugged in, no motor sounds or movement at all. I downloaded the GUI and...

And so it begins.

I just got a new RTF gimbal form RTF quads, but it doesn't seem to work. When I plug my 3s battery into it a solid blue light, and red light come on, and so does a flashing green one. This is my first gimbal so Im kinda lost. Any ideas on why it isn't working? Thanks!

RTF gimbal not working? HELP!? Hello, I just received RTF quads RTF gimbal that I bought. When I plug in my 3s battery nothing happens, three lights come on a solid blue, a solid red, and then a little flashing green. This is my first gimbal so I'm kinda lost here. Any idea on why it isn't...

Hi Guys, I have spent a lot of time trying to get the gimbal control to work via the APM2.6 and would like to share how I eventually got it working. I was using the RC channel directly from the reciever to the gimbal but the APM should support the gimbal pitch/roll natively but in the...

There may be a DJI Phantom competitor. Hubsan unveiled their X4 Pro at CES this year. They claim 40 minute flight times, although the guy in the video says 30, and full GPS functionality. It even has a 3-axis gimbal even though the landing gear does not retract...and the best part... it has an...

Here is my Carbon Z Cub being flown in FWBA mode with a Pixhawk flight control board using Saitek x52 joystick with flight, mission, and pan/tilt controls mapped to the joystick :) Enjoy as much as I did!

So far vibration dampening has been the number one enemy for me in this hobby. I have built quads that fly amazing (to me at least), but the part that always gets me is when it's time to isolate the camera from vibrations. I want to know what others are using as DIY vibration dampeners. I have...

A recent build and sunny weather in Autumn for south east England meant a video was possible. Enjoy and turn up the volume... its a nice tune! MultiRotor Videography UK.

Hi all, when I return from college in December I am hoping to build a deadcat style quad frame. I have experience with the classic X-configuration, but now I want more space for my camera gimbal mounted out front. My question is: what are the angles between the arms on a deadcat style frame. I...

I have designed a 2 axis Mobius gimbal on google scetchup. It is in the printing process, it might take some time.Any thoughts?

Right, so I am posting this about my latest tricopter build, based loosely off the great Windestål's design. Firstly I will say that I am 15, live in the UK, and am currently having my summer holiday. This build was completed to a massive budget, and in my mind was mostly an upgrade. I know this...

When I choosing the frame for my F450, I was looking at a frame like this with a pitch/elevator gimbal for the FPV camera. However, I've been thinking about how it could be implemented on to a miniquad. BlackSheep's Gemini made me think about it again. It looks like the Gemini has motors...

Been searching Internets for a while. Does anyone have any experience with using the naza as a controller for non zenmuse (h3-2d / h3-3d) gimbals? Not sure if it really can do other gimbals and nobody has documented it yet or just bad advertising on non US websites.