gopro

hey guys please have a look at my new video of me flying my bolt 250 with the new hero 4 session. please like and subscribe and share this video. link https://www.youtube.com/watch?v=KGIr5P-bkik

Looking for cost effective 5.8 GHz transmitter for GoPro Hero 3+ for use with fat Shark goggles

Just saw this at GetFPV. Looks just like a Mobius or a Runcam, but this thing can record in 1080p at 60fps! Doesn't cost much more, either. Can also do 720p at 120fps and take 16MP stills. Comes with an A/V out cable. This camera can also be programmed by plugging one of the ends of the A/V...

This is my first scratch build and I must say I am quite pleased with it! It is pretty nose heavy but I believe some design changes can fix that. Let me know what you guys think! Thanks! ~ Smooth Flying

I built this a few weeks ago. But have just been able to fly it this weekend. I came from a LaTrax Alias, to this. So things are still a little overwhelming to me. PID, curves, AHHH. Still learning. Kinda wobbly but I think some gains need to be turned down. I flew on Angle mode for this because...

Will a 600MW VTX interfere with the 350qx GPS, Compass, ect Can someone link me to a cable for gopro hero3 to immersionrc vtx that can work with a gimbal? thx http://www.amazon.com/600mW-5-8GHz-A-V-Transmitter/dp/B00OCNWWTS/ref=sr_1_2?ie=UTF8&qid=1440965969&sr=8-2&keywords=600mw+immersionrc

So I have bought myself a Turnigy Action cam for my Bix2 and wanted to mount it on a spare canopy which I have done today. The Bixler is on totally PNP Electronics and I am using a 3s 2200mah and a 7x5e prop I think. It didn't want to take off at all even with flaps into the wind. I am having...

Hello, so Im putting together my first quadcopter (480mm) and Iv dished out a bit more than expected for the parts. One of my most wanted parts was an fpv kit for the quad, however i couldnt buy one because of the price of even the cheap kits ($100+). I was wondering, if i had my own screen, say...

Hey everyone, I thought I should share my build here to get some feedback and hopefully inspire others to build their own DIY equipment. I am currently working on a mini gimbal to compactly stabilize my GoPro Hero 2. The goal is to mount the gimbal on the end of an extendable pole to use for...

Hi guys, so I'm currently designing my first homemade quadcopter and was wondering which flight control board to get based on what I want the quad to do. I'm building a quad for photography and footage and my camera is a gopro so it will be required to be a stable quad capable of lifting some...

So I've been looking for an inexpensive alternative to drones for arial GoPro videography. I primarily make cliff jumping videos and I thought it would be cool to get a shot by mounting a GoPro to the bottom of a glider-type foam plane and throwing it off a cliff above someone jumping. Ideally...

Hi everyone. I have an opportunity to win a GoPro with a Facebook challenge. I would really like to win as it seems that the GoPro FPV system works pretty well. The flitetest fan page on Facebook put us in the winning spot, but we have been far outpaced recently. All it takes is to go like my...

Hey everyone I want to start FPV flying. I have a Gopro 3+ and was looking for an easy way to learn using it. Any suggestions for goggles or other components would be greatly appreciated. Thanks

I have two quadcopters for sale. Both are practically new. Selling because I have another 250 that I fly a lot more often than these. The HobbyKing Spec FPV250 is RTF and a fairly clean frame. It flys ok, but I prefer the Naze32 board over kk, so I would recommend picking one up with it. The...

Hey guys, I have now finished my build of RcExplorers Tricopter V3. Im using the KK2 Mini as FC and to record the video the GoPro Hero 4. It flys pretty good but the video isnt that smooth as I want it to be :( I took the PID-Settings from David. But I lower the P Gains a little bit so that it...

I have been flying a RTF micro quad for about 6 months now and I would like to build my own multirotor. I'm not interested in racing quads, so I was thinking about starting to build a platform for aerial photography and video. I'm just looking for any general input from people who have gone...

I had the chance a couple weeks ago to chase a snowmobile out on the frozen lake using my FPV250L. It was a great evening to get some footage with a beautiful sunset. Check out the video below!

My last creation. A sort of BatCopter. Flies pretty well. Need a bit of tuning. I already lowered and spreaded the front rotors to give a better airflow around the wings and it's much better now (less shaky). AUW: 1 kg Motors : RCTimer HP2812 - 1300 kV (crap) Props : Hq 9X5 FC : kk2.0 v1.6++...

I hope you like my latest work which I made to showcase some of the beauty when snow falls on my hometown and surrounding area. Cheers!