help

What budget transmitter is better? Flysky FS-i6X or FrSky Taranis X9 Lite?

The parts I am modeling in fusion are transparent while others are not! How do I fix this?

Does anyone know how to cut foamboard properly? Whenever I cut it, it either goes off-center, the blade chips, the foam breaks, the foam pulls, and generally doesn't cut right. I have made 4 foamies before and all of them have crashed or been very draggy because of this problem. Does anyone know...

I have been trying to find what receiver would work with both my eachine Lal 5 and my Spectrum DX4e but it isn't too clear on what would work and I am confused. From what I've seen a dsmx or dsm2 receiver would work with my transmitter but I don't know what my flight controller would work with...

Hi everyone, I've been building and flying Flite Test planes for about 6 months now, and I'm currently lucky enough to be in school, not online. I feel pretty confident in both my flying and designing abilities. I have a study hall currently planned for my second semester in high school (10th...

I am trying to get this item for free so that I can get into fpv flying so if anyone who has an account can slash/click the button to reduce the price, it would be greatly appreciated. Please help me slash it！ https://banggood.app.link/https://banggood.app.link/mIo81zkAVbb

so im gonna be putting an ft aura 5 lite in a carl Goldberg anniversary piper cub, which is a tail dragging aircraft. will i need to zero the aura while holding the tail up as if the plane were in level flight? also how would i reduce vibration of the board? im nervous that it will vibrate and...

Hey guys! I decided to at least figure out the electronics for the earlier version of the latest crash that I did, I figured the problem that I had was that my esc or moter would start heating up. I had a 3s battery with a HGLRC 1407-3600kv motor, does anybody know what size ESC I need, if you...

Hi! I was wondering what flite test plane I can build that would be best for flying in small spaces with a power pack C. Any help is much appreciated!

How do you scale down PDF plans for planes?? I wanted to make a mini ShrubSmacker out of cardboard as a prototype, but I have no idea how to scale down plans. Thanks in advance, _________Planesandthings

I'm almost out of foam!! does anyone have plans that work with cardboard?? shipping times take till we all ded, so cardboard will have to do :) Thanx in advance!

I was watching a video of engine starts recently and I thought it would be cool to have a scale looking engine start for my Dumod. I have a Taranis X9D+ and would like to figure out how to program it so that the left motor turns very slowly for a bit, then kicks faster a couple times like each...

I am in need of a very cheap RC TRainer plane and I'm not that keen on scratchbuilding as I'm low on glue. Something under 75$, and small. Does anyone have a suggestion of which plane I should get? Thanks in advance!! If you can read this, you can eat a cookie :>

I NEED HELP O FLITETEST GODS! Hey guys! I need some help. 1) can I please have plans that a beginner can make that works with the a-pack? I do not have a laser cutter, hotwire cutter, or etc. I only have a craft knife and glue. Can you flitetest gods give me a plan that uses no more that 1 1/4...

Hello! I am building my first ever racing drone with a PWM setup but I am having a few issues that I cannot figure out so I was hoping to get some help. I have a SPRacingF3 Flight Controller connected to a FS-IA6 RX going to an FS-I6 TX. I know that everything is set up correctly because the...

Was flying my fpv drone, with the DJI HD FPV system. Had a nasty crash. To my surprise, nothing broke, atleast visibly. I can still fly, and the video is nice and smooth. However, when I playback any footage, it's superspeed. I can look at the videos, and see that the recording before the crash...

I shorted my lipo battery(1300mah, 3s, 45C) balance plug for a split second and some smoke came out but the lipo was still useable & chargeable. However I noticed that the 2nd cell was kind of weird… My multimeter(https://www.amazon.com/gp/product/B07RNPHJN6/?tag=lstir-20) said it was at 3.78...

I recently purchased the FT Spitfire speed build kit, and I was wondering what the proper motor and propeller combo would be. I already have an E-Flite Park 480 (910kv), so if I could use that, that would be great. On their store page, it says to use a 10 x 4.7 prop slow fly. What would be the...

My 1300mah 45C 3S TATTU lipo battery is a soft case battery and the top part of the battery where the wires are, is squishy like foam squishy. It is a bit firm but like pushing down on Walmart and Ross foam board squishy. Also the bottom part which is also soft case is also squishy. Is there...

you can see it in this video at 6:57 above joshes hand. Does anyone know how it was made or where i can buy one looks fantastic