mini

weight no battery 315g wingspan 29.5" (750mm) length 21.25" (540mm) motor 2208 1350kv prop 7x5E 4x3.7g servos 4 channel control cg (so far) 40mm back from leading edge From wikipedia: ========================================================== The Curtiss P-36 Hawk, also known as the Curtiss...

This is the original, 20" span Baby Bugatti! This one also has "official SP0NZified" plans!! Thanks SP0NZ! We all have our stagnant points... either those times when we're working on something and nothing seems to go right, or we want to try something new but inspiration and motivation are...

This is V2 of my Baby Bugatti, slightly larger with a 24" span, and a little easier to handle (and see in the sky). We all have our stagnant points... either those times when we're working on something and nothing seems to go right, or we want to try something new but inspiration and motivation...

How do you scale down PDF plans for planes?? I wanted to make a mini ShrubSmacker out of cardboard as a prototype, but I have no idea how to scale down plans. Thanks in advance, _________Planesandthings

Mighty mini scale Avro Arrow. Probably will come back at some time to round the front nose. But for now it flies pretty well. Motor: 2204kv (F pack) ESC: 20amp Emax Servos: 5 gram (2) Battery: 850mAh, 3 cell Prop: 6x4 2 blade. 3/16" up reflex on ailevons.

When I set out to design the Spitfire, I wanted to try keeping things simple and easy to build for a Master Series plane. I chose to go for a fuselage that has an inner frame that then gets skinned in foam, rather than taking the "mold together" route that Overstreet uses. I put a lot of work...

Build Skill: 2, Pilot Skill: 0.75 (Crashed 8 times, max distance 3/4 of a circuit, no landings) FT-Mini Tiny Trainer - Cause my Simple Soarer died before it even lived. Build Photos FT-Mini Corsair - I want a warbird, and I need practice with round fuselages Build Photos FT-Bloody Wonder -...

My fun little hurricane

Here I present you the little brother of Argus, the Mini Argus (prototype) with only 650 mm (25.59 in) wingspan. You will only need one sheet Flite Test Water-Resistant Foam Board By Adams (20 x 30 in) and a Flite Test Power Pack A (or compatible electronics) for the build. Since I only have...

There is a post for future FT Plan Ideas and there was some discussion on the P-38 and I decided to jump in and do a design from scratch and it ended up being a bit more than what the original goal was. Thoughts, opinions, ideas are welcome while I finalize the design. Here is the result of a...

I think I found my own answered the question below. The mini scout. Hey all, I currently have a ft mini mustang with a flitepack F and a 75C battery. I am looking for suggestions on a new mini plane. I would like one that flies slower and floats more in the wind. And can utilize my flite...

I started down this road several years ago with the general "I'll get around to it some day" attitude, but being given a busted quad and a big bag of parts at around the same time I discovered that Vincent (http://rcfbaircraft.com) had pased away was enough of an incentive to get moving. I had...

Here are some plans for a mini Bf-109. The plans aren't pretty, but, feel free to give it a whack. Here are some things you need to know to build it. For the top hatch peel the paper off the bottom side to help it bend. Then for the power pod just sink it in until the motor doesn't show, and...

My second project for the holidays: This really smart saeplane. The Redaq 1.8 is not my own design, the original EPP version was designed by Dieter W. and is well known in the german seaplane flyer community, you can find it at almost every event. I want to build a mini foamboard version with FT...

I love flying my E-flite Timber, especially in the snow, and after seeing the bushwhacker episode on Flite Test, I was fascinated about the small space they were flying in. And I really like the mighty mini setup and size. I dont know why nobody has come up with a smaller bushwacker yet, it...