This Foamboard Model has been tested and Flown, It has an Edge Racing Lite 2205 2480kv Brushless motor, 3 9g servos, a 40a 2-4s Brushless esc, and a 5x5x3 Prop. This plane uses a 850-1000mah 3s or 4s lipo (not included) And will need a receiver to complete as it’s a PNP. It does have a...
This is meant for Mr Mans Mighty mini master series Corsair if you don't have a 3D printer. It is similar to the FT firewall for there Master Series Mighty Mini's.
Note: As the mount hole size of each motor is different you might have to adjust the hole distance slightly. Also as this doesn't...