• This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn more.

park300

  1. R

    FT-22 Raptor Setup, Warm motor....

    Hi all, Wondering if I can get some help here. My Raptor is setup as follows, Turnigy Park 300, 1600 kv 18 amp turnigy esc 8x6 prop 1350 mah 3s With this setup I am pretty happy BUT..... The motor is kinda hot (hot like, I can't hold it in my hands for more than 10 seconds) when landing...
  2. M

    GoPro too much for my tricopter?

    Hey Guys, I am pretty new to multirotor. I built up a tricopter based on batbones frame with the following KK2 board 20 Amp Multistar ESC Turnigy Park 300 1080kv 9x4.7 plastic props (9047) 2200 MAh battery 3S Orange RX GoPro Hero 3 Immersion RC tx w/ mushroom I have probably 20 flights on...