plane

Hi I am new here and wondered if anyone has built an RC plane from correx? I built a spitfire from from correx many years ago. It was called the CORROSPIT by the guys who designed it. This is their site...http://www.spadtothebone.net/ I have used the same plans and built the CORROSPIT from...

Hi all, First sorry if I am in the wrong forum. I'll admit it. I'm a noob. I have tried a few FT planes with no success. I tried designing my own plane... It was a flop. Now I am hoping that I can get some help as to which plane to attempt next. And if possible I would like to use some of my...

Hello my name is Callum. I am new to scratch building and have decided to make a swappable replica of a Baron 58. It used 3 sheets of a1 foam board. The plans are not finalised yet but if you would like them just pm me and ill get therm right to you with a few instructions. Thanks for reading...

Here's a challenge for you. Try and make a baguette fly! I'm thinking of the bread as the fuselage, then you can build around that. Pretty easy to hollow out to make space for electronics, too. Just don't leave it laying around in the shop for a few months! You could even make two and have a...

https://youtu.be/3xkqwqhPI1s Had the incredible chance to film the operations at the New Castle Virginia glider port. Hope you enjoy this film. Full permission was granted from the pilots to do the filming. All of the aerial shots were filmed with the DJI Inspire 1. Thanks for watching! (If...

Just anything crashed that you dont want to repair, i live in boston but shipping will be 50/50

Hi, I've been flying an easystar 2 for 1 year and flying on the simulator for 3years. I don't know how to continiue:confused:. I've been thinking: -E flite ultra stick -Multiplex Tucan Thx:cool:

Hi guys, i'am young engineer from Lithuania. I'm trying to build carbon frame plane with two cameras one in the front and one 360 camera under it controlled remotely from ground station. Currently i'm looking for some resource how to build plane with gas engine. I know how to build with...

I challenge anyone to make a one channel plane, where you use a single motor that controls speed, elevation, and direction. Use a big prop.

Hi, today I would like to know if you want to see my cardboard space shuttle to be converted to foam and make it fly! please leave a comment if you want to see it fly :) or rate this article. See my full build of the Challenger here ...

Hi, today my 1hour build will be "automatic elevator". You can use it for smoother turns without dropping your plane too mutch (thats the theory ) make your rudder with smooth moveing parts be sure that also your elevator has also smooth moving parts take some wire bend it put the...

The Antonov An-225 Mriya, the largest plane in the world(length). I would really like to see a foamie version. As of yet, this plane has never been made into an rc version, as far as I could find. It might be due to its immense size, but I callenge you guys at flight test to make one. I t is...

Granted I have a blog and I will be keeping it posted on how this works, I wanted to add to this topic of scratch building. I am working on a Weather Research Drone that is designed to study lightning.. The hardest part of the project was finding a concept that fit into the plan for the study...

I had the bright idea one winters day last week to put Estes rockets onto a plane. Having only found one video on the YouTube of a guy who just taped one on a trainer. Also having seen David's rocket plane, I thought I'd take it farther and build an EDF Jet that had two D sized rockets onboard...

Hi guys, i am trying a cool recycling, i have a rc plane a Dynam Sbach 342 and i am getting a little bored of it, i seem to like helicopters more than planes so i thought id try to make it into a rc helicopter. it will be -fixed pitch -4 channel -around 4.5 feet in length I already modified...

Is is just me or have there been a lot of cargo plane's popping up recently? Anyways, here's another. I built this plane with a close friend last year. Flies great, and it lasted a very long time for DTFB plane. In fact, it's still in good shape, I just wanted the electronics so I...

I have recently built a baby blender. I have a 1000kv tunigy motor and a 30 amp esc swinging a 8045 prop. I can not get it in the air, every time in gets about a foot in the air then fall out. I don't know whats wrong. Any help would be very helpful. Thanks Jace

I always catch my cat doing weird stuff around the house, this one was worth to take a photo of! I would like to ask not to take credit of this photo since it is on my portfolio of my company.

Hello all. In this thread, I will post updates and build progress on my newest RC Plane. It will be a twin motor cargo plane with a 75" wingspan, and 50" long fuselage. Here are the current specifications: Dimensions 75" Wingspan 12" Wing Chord 3"x20" Ailerons 3"x12" Flaps 26" Horizontal...

Hey All! Here is the official FPV Fest 2014 video I've just finished. Alex and Peter from Flite Fest came out on Saturday for the FPV and LOS racing, and took first place in the LOS open class races with the ReadyMadeRC Lunar Eclipse. Check it out!