• This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn more.

quadcopter

  1. C

    Blade QX 180 FPV conversion

    So I want to try FPV! I was thinking about building a 250 fpv quad, but i wanted to try it first to see how it all works before investing my time and money. I have blade qx 180 and I have looked at some stuff online but am still kinda lost. i keep finding them for sale. So here is what i have...
  2. Croom

    FPV in my Backyard

    Just some fun messing around with my Ultra Micro FPV in the backyard. Believe it or not, I used a Syma X5C to capture this. I used the Hobbyking HD wing cam and mounted that on the bottom with my FPV gear on top. It was a little underpowered, but I got some cool footage. Usually without the...
  3. I

    More Tarot Gimbal Testing and Raw Video

    I got out the other night and did some more work with the gimbal, as well as shot a quick video without it. The gimbal is a Tarot 2D gimbal, and I am flying it on a Cinetank Mk II quadcopter. Thanks for watching!
  4. 1

    QAV Flips and Rolls and Fun

    This is me messing around my house having some fun hope you enjoy. https://www.youtube.com/watch?v=IyTmYvm2mso
  5. 1

    QAV Flips and Rolls and Fun

    Tell me what you think in the comments Enjoy
  6. U

    Beginner FPV multi-rotor help

    Hello. I am looking into getting a quad-copter and flying FPV but I am a little confused. I am thinking about getting the quad from this video (https://www.youtube.com/watch?v=GKz6KVGrjmI) and modifying it to do FPV with the camera setup from this video...
  7. W

    CCW motors overheating.

    There have been a few mentions of these kind of things on the internet but so far I haven't been able to find a working solution for my quad. the two CCW motors are overheating, while all the other motors are staying cool. I have switched the props and balanced them, checked if the arms are...
  8. I

    Learning some new tricks ---- Almost Dark - FPV

    I managed to get out flying again after a couple weeks of wind and rain. The bugs are now very bad (thus the short flight on top of the cliff), however I did manage to practice some different dives. Also some low flight in this video. Check it out. :)
  9. E

    ARTF Folding quadcopter

    PICTURES AVALIBLE AT THIS PAGE http://www.ebay.com/itm/Custom-Built-Quadcopter-/121663855178?pt=LH_DefaultDomain_0&hash=item1c53bb1a4a Custom Built ARTF Quadcopter Naza Control board (GPS NOT included) 20 amp escs 1000kv motors Folding design for storage and transport Complete setup...
  10. O

    Oaktree's venture into the world of RC Quadcopters

    Since it was FliteTest on Youtube that got me interested in RC and "forced" me to start this hobby, I figured I would log my progress here on flitetest forum >.<;; My adventure starts with 2 years of watching FliteTest videos and drooling over the RC vehicles :P After being really bored one 4...
  11. I

    Tarot 2 axis Gimbal Testing

    Here is my first video using the Tarot 2D gimbal. This is mounted horizontally on the front of my Cinetank Mk2. The gimbal is working pretty well so far and really smooths out the video. I am running a seperate FPV camera (Fatshark 600TVL) so I can still see the quadcopter tilting, which means I...
  12. I

    Close call with a seagull - Cinetank FPV

    So a passing seagull almost ran into my flying cinetank mk2 quadcopter, luckily it missed, so I followed it for a while. It was a very interesting flight.
  13. I

    Best Way to Film Deer - Cinetank MK2

    I had the opportunity to take some aerial video of some deer in the field. The deer didn't seem too concerned by the quadcopter itself and only walked away after a few passes. The Cinetank is flying well and seems very stable. Enjoy the video!
  14. K

    Coreless motor performace

    I am building a small quadcopter with coreless motors. This one: http://www.seeedstudio.com/depot/37V-50000RPM-Small-Coreless-Motor-716-p-1884.html?cPath=39_40 Speed: 50000 rpm Rated voltage: 3.7 V Rated current: 100mA I think Hubsan X4 uses similar motors. So, i guess, i can get the lift...
  15. M

    My First Multirotor

    Hey guys I wanted to share with everyone my experience building my first multirotor and some of the things I did to get it in the air. I set this up to be 2 person so I can fly it and someone else work the camera. First Id like to say this was built with the idea of moving some of the parts...
  16. Croom

    Illegal Quad Video

    xcv
  17. J

    Cant get my FPV setup to work :(

    Hi, I'm started to feel a little frustrated and that I have wasted my money due to wiring up all my fpv gear and getting nothing, hoping someone could please help. Here is what equipment I have: TX&RX...
  18. SeattleNiteFlite

    Cheap RCX-FPV260 Quad Build - my 1st multirotor

    I'm sure some folks don't like cheap quad kits, but I had to go for it. All the more expensive bare bones kits I looked at didn't include an FC board, so I went this route to see if I even like multi rotors. I also like the small airframe to start out, since I don't have a ton of space in my...
  19. M

    Naze32 works but cannot connect via usb

    This is my first quad copter build and so i am very new to all of this. I am using a naze32(full version) and was using cleanflight to set it up. I did manage to start to set it all up without any problems. I managed to assemble the whole quad copter fine and everything seemed to be working but...
  20. S

    HK X550 & HK Spec FPV250 FOR SALE

    I have two quadcopters for sale. Both are practically new. Selling because I have another 250 that I fly a lot more often than these. The HobbyKing Spec FPV250 is RTF and a fairly clean frame. It flys ok, but I prefer the Naze32 board over kk, so I would recommend picking one up with it. The...