receiver

http://www.amazon.com/gp/product/B012W6HJHG?refRID=JZT7QBWWKVPX89MX5D45&ref_=pd_ys_sa_3226142011_8 I am unsure of whether this is any good or not but would like to know if anyone knows anything

How to control a quad in the safest condition in case of fly away ? Hi, this is my first time on this forum and i'm a newbie in the quadcopter world ! First of all sorry about my English. So, I just finished (and crashed) my first quadcopter. And even if I tried, before flying, to get the...

Hey everyone, first post... So I've been meaning to ask some technical questions about the factors that are involved in the FPV system. I've just pieced together my first system over the weekend and took a maiden flight a bit earlier today, and so far it was a success, but I'm trying to...

so before you go all judgy on me, i have almost no experience when it come to electronics in the rc-departement. So i bought this WLtoys V666 quadcopter witch made me very happy and included a controller. I only paid around 120 euros for this. So imagine my surprise when i looked on the internet...

I need to know how to use the channels when connecting the ECS and Servos to a Turnigy 9X Receiver? IE - What is plugged into each channel on the Receiver? The receiver was initially set up by a friend, and Bound to the Radio, but I removed all the connectors to work on some items and promptly...

Hey everyone, I am picking my components for the FT 3Don hobbyking, and I have everything except something to connect the two different servo's in the wings together. I mean, there is only 1 port for ailerons on the receiver. How am I supposed to do this? You use a Y-harness for this right? I am...

Hi guys, I am running the MZ-24 and GR-24 Hott system in a big scale scratch build balsa P-38. With a multitude of servos, multiple on same channels via Y-leads, and 3 power-hungry electric retracts, am I in danger of overloading the receiver? It seems like a lot of amp draw thru that little...

So I have an R620X receiver. I bought it, bound it, and tested it with a servo. All good. Then, I went to connect it to my Pixhawk, and got nothing. The R620X is advertised and a CPPM receiver, which should work just fine with the Pixhawk, but I got nothing. Just to be sure it wasn't me being...

Hello Im currently looking into getting my first full fpv system for my 480 quadcopter. I have a few questions I was hoping you guys could help me out on that I cant seem to find the answer for. Im also on a budget, trying to get the full bundle for as cheap as possible. 1. What makes the...

Hi guys just wondering if anyone has used this transmitter and receiver set from hobby king http://www.hobbyking.com/hobbyking/store/__9042__Hobby_King_2_4Ghz_6Ch_Tx_Rx_V2_Mode_2_.html Thinking of getting it for a quadcopter build? Any thoughts on it? What would the range be on something like...

Hello, a noob question. What would be the best deal for the money on to get something that would allow me to stream the vidoe on my tv like they do it in so many flite test videos. I will have the fatshark goggles but i would like to be able to output that video on a tv aswell for when i fly...

I jut got my LiPo battery in the mail today. My dad and I were trying to hook it up to the receiver and it simply would not fit. In trying to get it to fit we unwittingly turned to connector around and fried the receiver. Because of the way the battery plug is, it won't fit in the right way. I...

Hey everyone, So, I wanna build a Guinea Pig with Pun Jet this summer, and I already have a 4 channel receiver from my FT Flyer. It's clear to me that the Guinea Pig will need at least a 5 channel receiver, but what about the Pun Jet? I mean, it only has 4 channels: ailerons & elevators...

I am new to RC, but plan to really try to get into it. My first investment into the hobby was an FT Racer. Bad choice? I'd say. I definitely should have either started by buying a RTF, or scratch building a simpler, easier-to-repair plane like the snowball or flyer. Anyway, I made a stupid...

I bought a Hobbyzone RTF Champ plane, and I have started moving on to scratch building. I was wondering if I could use my Champ's transmitter and bind it to another receiver. If so, which recievers would be compatible (Hobbyking link if possible) and if not, what is a better transmitter that I...

I'm just completing my initial build of the versa wing. I have a spectrum ar610 receiver and with the servos plugged into it its a bit too tall to fit completely inside the wing. I've built it as a pusher so I don't have the power pod. Since I'm a rather new flyer I'm expecting it to take a...

Hello, I recently ordered the components to build a FT Flyer (and Delta later on), but I still have to order the transmitter and receiver. I am going to visit a local hobbyshop this weekend, and I was planning to buy the DX6i with an AR400 4 CH receiver. This will cost me about €130. However, I...

Hello, I recently ordered the necessary components to build a FT Flyer from HobbyKing. As I live in the Netherlands, I ordered everything from the HobbyKing warehouse in the Netherlands (cheap shipping). However, there were no cheap transmitters and/or receivers in stock. Coming weekend I am...

Hey everyone, I recently took interest in FPV flight, and since I'm familiar with quadrotors, I thought I'd start with the Blade Nano QX FPV RTF. I wanted to make an investment into the fatshark goggles and the camera so I could use it later. However, I couldn't figure out anyway to receive onto...