slow

Just as the title states I've got a 25cc from a leaf blower and want to put it on an rc airplane. Hoping to use around a 22x10 propeller. Any ideas are helpful! Man.

I'm trying to build a new airplane from old electronics, but not sure which one to choose any help would be great! Electronics: 2210 1450kv motor from a convergence, a 50a esc, four 9g servos, and of course a dsmx receiver.

Hi all! Thought I would share my recently completed build of a 3 channel modification based on the FT Simple Storch - this one has come about due to the need of something nice and simple to introduce my 10 year old nephew to the art of aeromodelling. The general goal here was a simple three...

Hey all, been driving my wife crazy for quite a while with Flite Test, I can't watch it on the TV anymore :mad: but hey I always have the PC. I know this has been asked a few times, but before I get the hey its in here, look ( I already did ) or just build this... i want to give you some...

I'm looking for some input, critique and suggestions on a design idea - The plane's target weight with a GoPro Hero 4, a 3S 3,000mAh battery and supporting electronics is under 45oz Construction will be a 3D printed frame of carbon fiber filled nylon - with two 7.5mm CF tubes through the...

Hello, I am new to the rc world, so I decided to build the mini mustang, and now that I am finished with the built in was checking the electronics and something weird happens. I already did the throttle range adjustment for the esc, but when I try to start the motor at low speed it starts to...

Hi guys, here is my first scratchbuilt foamie, which I designed and built in 10days. After this succesful testplane, my next project will be more detailed. A 3,5meter / 138inch Cub with about 4-5kg flying weith. I hope you like it ;) https://www.youtube.com/watch?v=3P5T1INSMdI

Hi guys. I've been working on a build that I saw in this video.. Unfortatly Mikey dosen't have the plans or the plane. I looked at both of his videos that feature the plane frame by frame and was able to get most of the measurments. Also he listed most of the components in the comment sections...

Hey gang, I was impressed with the half sheet racer that Springer made over on RCGroups. http://www.rcgroups.com/forums/showthread.php?t=1565081 I thought I'd take my hand at making a half sheet plane too. My plans are based off his. although there are a couple of tweaks. I modeled my...

Practicing flying low, slow and steady with my twin engine YC-14. BUT for me low and slow does not always end up good.............. http://www.youtube.com/watch?v=b6VSQGbkQpo&feature=player_detailpage