turnigy

Got all my gear, now I have to assemble it. But first ... I need to make sure I am wiring this right. If you more experienced pilots and builders could lend me a hand it would be greatly appreciated. Below is my unfinished diagram (please forgive the MS Paint Graphics, my graphic design...

Hi guys, I've got a turnigy 35-30 1400kv motor to go on my EPP FPV. Connected to a 40a esc with bec. When I start up the system. I get the tune and then no further beeps to indicate all is good and no further beeps are made. However, whenever I give some throttle on my tx the motor just ticks...

motors, esc, board... 4x DT750/6247 hexTronik DT750 Brushless Outrunner 750kv 4x TR_P30A/2164 TURNIGY Plush 30amp Speed Controller Hobbyking KK2.0 Multi-rotor LCD Flight Control Board http://www.ebay.com/itm/321281438128?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649...

Decided not to sell

Okay, I feel really stupid. I've seen the posts and videos on how to fix a Turnigy 9x after switching the polarity on the battery. I always wondered, "How could anyone accidentally switch the polarity on the battery?" Well, now I know. And it let out that all important magic smoke. Now I'll have...

Hello People. I'm having some troubles with my Bonsai wing. Let me explain my current setup first: Hobby King GT-2 2.4Ghz Receiver 3Ch Hobbyking Bonsai EPP Wing 600mm (ARF) Turnigy 1811 brushless Outrunner 2900kv Turnigy nano-tech 460mah 2S 25~40C Lipo Pack APC Style Propeller 5x5 (2 pc)...

I have been using the Turnigy 500mAh 2s battery and just recently it has been depleating awfully quickly without any use. I have it fully charged and plug it into my plane, go outside, full throttle, launch and already by this time it doesnt have enough battery to keep it in the air. I know it...

Hello all, new guy here and still wrapping my head around all that is brushless. I'm building a plane and bought a Turnigy G25 (710Kv) motor for it. My question is about which battery to use with it; 3s or 4s. I want to use the 4s and reap the full potential of the motor but I'm concerned...

Hi, This might help save on some parts for those who are planning to build the Turnigy Integrated PCB Micro-Quad (KIT) from HobbyKing. Find my codes here: http://hk.rc-international.info/swarm/sameerkm (valid until August 20, 2012) Turnigy nano-tech 850mah 2S 25~40C Lipo Pack Save US$...

Hi, I need batteries for my Bixler which I am also going to buy. Here is what I have in mind: A Nano-tech 3S 2200mAh and a 850mAh spare just incase. What are your suggestiong on the 2200 3S and I need help in getting the backup 3S. The backup must be cheap.

Hey guys, Here are the buddy codes for a Turnigy nano-tech 2200mah 3S 25~50C Lipo Pack: http://www.hobbyking.com/buddy.asp?code=C506E39C-8E5F-45F4-B156-65597977C885

- Neckstrap of Awesomeness - - Official Thread - This is the place to talk about the Turnigy "Neckstrap of Awesomeness"! You can get it here for less than a buck! Feel free to post any picture or video containing a neckstrap of awesomeness...