warbird

FT P-40 Warhawk Designed By: Andres Lu Plans By: Dan Sponholz Description: The FT P40 is a Flite Test take on a classic design. Simple build techniques allow this plane to be folded together in hours and result in a flight experience that an intermediate to advanced pilot will enjoy. Add the...

FT P-40 Warhawk Designed By: Andres Lu Plans By: Dan Sponholz Description: Coming Soon Speed Build Kit: Coming Soon Power Pack Compatibility: Power Pack C Specs: Wingspan: Center of Gravity: Control Surface Throws: Expo Suggestions: Free Plans: FT P-40 Warhawk Plans Printing...

FT Corsair Designed By: John Overstreet in collaboration with Flite Test Plans By: Dan Sponholz Description: The FT Corsair represents a new chapter of Flite Test scratch built aircraft! Using techniques developed by John Overstreet which he has also used in his metalworking, this plane uses...

Hello FliteTest Forums, due to where I'm going to be living starting this summer, I can finally go to flite fest for the first time! And for it, I'll be building a 1400mm P-39 using dollar tree foam and balsa. The P-39 has always been one of my favorite WWII airplanes but there has never been a...

It's incredible seeing warbirds that are not the typical Mustang or Spitfire. Join us as we look into this model and how well HSDJets did bringing this warbird from the Pacific to the modelers' hanger!

will the 800mm corsair v2 by fms fly on a 3s? also, what prop should I put on to make sure it doesn't draw too many amps?

Inspiration: During Family Day Trip to Wilmington, NC with my Mother, Step-Father and Sons, we stopped in to U.S.S. North Carolina. a WWII Battleship. Something I had passed EVERY time I went to Wilmington over the years living in NC. As the morning was cloudy and a bit rainy, it was a perfect...

Spitfire on a low pass

P-51D Mustang

I am looking at a warbird right now but don't know if i can add a 5 or 6 cell battery to it instead of the stock 4S recommended without burning out the electronics. how can i figure out if it will be ok to run on 5 or 6 cell? this is the plane i was talking about btw...

Enough teasing in other threads, now is time to make one dedicated for this one! First, a bit of history of this airplane. In 1937, the French air ministery wanted a light single seat fighter after realising in 1936 during the Spanish civil war that the french aviation wasn't really up to date...

Howdy. What we are going to have here is a DTFB/purple foam/balsa composite build with full aluminum foil sheeting. Other features are aluminum tube for control surface hinges, aluminum tube suspension, and a belly exhaust vent. Wingspan: 36" Predicted weight: 400grams The wing is built on...

All up weight- 405 grams Wingspan- 36 inches This will be brief. Please leave any questions, tips, or builds of your own in the comments. Most of the wing construction i will skip. It is a standard D tube wing. The ribs were made using the "sandwich between plywood ribs" method. It was...

So a few days ago I started pondering over the concept of building an RC heinkel 111. I've always had a strong fondness for this plane, and found its smooth curves and eliptical wings very aesthetically pleasing. I then thought about building it to the same scale as the FT spitfire, realising...

Introduction This thread is dedicated to the build log of my Dad's Guillows P40. This plane has a very interesting and unique history, and I have really grown quite attached to it. I am really looking forward to completing the plane and seeing it in the air, and I hope you will too! Please...

FT MiG-3 Description: The FT Mig 3 is a result of a wonderful to your collaboration with one of our community members, Nic Lechner. Nic’s incredible design has been simplified so it can be built as fast as it flies. The FT Mig 3 uses the same familiar techniques that are incorporated in all...