150% ft Spitfire

[Trains1213_YT]

My 125% spitfires wingspan is roughly 1350mm. So if you correctly upscaled yours to 150% it should be 1620mm. The original FT Spitfires wingspan is 1080mm Just so you have all the numbers. Quite a bit bigger when you look at the exact numbers. Lol

thanks! The cockpit looks great.

 

[Trains1213_YT]

Yes mines 1620mm it's easy take the standard size 1080mm and multiply it by what ever percentage u want. 1080 x 150% =1620. Also it's roughly 1/7 scale I think. You can do the maths backwards to figure out how big you need to print of you have a size in mind

Thanks!

 

[Trains1213_YT]

What motor are you using.

 

[Hyper46havoc]

Cockpits/canopy is pretty much done will have a good clean up before paint. The sliding hatch/door works better than I was expecting

 

[Hyper46havoc]

What motor are you using.

Motor is https://hobbyking.com/en_us/turnigy-d3542-4-1450kv-brushless-outrunner-motor.html I would sooner a lower kv I have a 11x7 prop 60amp esc I have no idea at the moment if this will work

 

[Hyper46havoc]

For the runners I used this stuff electrical conduit cut up obviously

 

[Hyper46havoc]

Will finish off paint after maiden will be same as small one just need some servos and a rx and good to go. Been bad wind for ages now can't even get out to fly the little one

 

[Trains1213_YT]

Will finish off paint after maiden will be same as small one just need some servos and a rx and good to go. Been bad wind for ages now can't even get out to fly the little one
View attachment 126616 View attachment 126617 View attachment 126618 View attachment 126619 View attachment 126620 View attachment 126621 View attachment 126622 View attachment 126624 View attachment 126625

THAT THING LOOKS AMAZING!!!!

 

[Hyper46havoc]

Thank you I have been tempted to go with the spitfire speed record attempt colours N17 the whole time building it the canopy matches up better aswell as it being very different

 

[DazDaMan]

Just found this thread. I was thinking about doing a 150% Spitfire at some point.