jfaleo1
Junior Member
Well Since I have been working on a bunch of new planes and repairs while I have been dealing with a lot of other projects I thought I might share a couple.
1st up a 200% White Diamond originally by @JGplanes. the intended setup is two 55mm fans and 4S battery. Additionally I plan to look at adding a set of retracts for ROG and it will have a fuselage similar to the 3d printed one. Hardest decision is how to do the flight controls, stick with elevons, or split the elevators and ailerons.
1st up a 200% White Diamond originally by @JGplanes. the intended setup is two 55mm fans and 4S battery. Additionally I plan to look at adding a set of retracts for ROG and it will have a fuselage similar to the 3d printed one. Hardest decision is how to do the flight controls, stick with elevons, or split the elevators and ailerons.