2021 Piper Cub Build Challenge Finishers (not complete yet)

Taildragger

Legendary member
Don't freak out if you're not done, we still have a little more than a week. I just need this thread to organize the other one

@quorneng with a sub 250g PA-18
1643992017172.png


@Bo123 PA-18
Unfinished but flew for 30 seconds
1643992104953.png

View attachment 217913
1643992161796.png
1643992199698.png


@LitterBug FT simple cub
1643992667002.png


@BlockerAviation FB Cub-ish
1643993315219.png

https://www.youtube.com/watch?v=ZKtQ3rtoxgU

@cyclone3350 Sig 1/4 scale J3/Pa-18 mix
1643993837354.png

1643993921898.png

1643993965042.png

1643994010447.png


@synjin J3 cubbish
1643994216990.png

1643994420077.png

https://youtu.be/P5nAfL9r3Hw

@Ratcheeroo Piper Tri-Pacer
1643994472641.png

1643994670386.png

1643994687937.png

1643994707675.png
 

Attachments

  • 1643994336305.png
    1643994336305.png
    10.4 MB · Views: 0
Last edited:

Bo123

Elite member
Can you please point out that mine was unfortunately unfinished, however did fly, for about 30 seconds, until it was blown by the wind, into the ground.
 

quorneng

Master member
Interesting model Simon, flies pretty well too
It is actually now pretty old. It was my first plane that has no spar in the wings, they are just built out of 2mm Depron and are simply glued to the side of fuselage meaning the balsa struts take the vast majority of the flight loads, just as they do in the full size.
Not really a Flight Test foam board plane but more a super lightweight so not really eligible in the competition.
 

Taildragger

Legendary member
It is actually now pretty old. It was my first plane that has no spar in the wings, they are just built out of 2mm Depron and are simply glued to the side of fuselage meaning the balsa struts take the vast majority of the flight loads, just as they do in the full size.
Not really a Flight Test foam board plane but more a super lightweight so not really eligible in the competition.
No this competition was anything. even balsa :LOL: