3D Printed 2.5" spinner for radial motor

Piva

New member
Hey guys, I put together a 3D printed spinner design for the new radial motors and I'd like to upload it here somewhere for the community to test. It's optimized to be printed without supports and 3 perimeters with .4mm nozzle and 100% infill. Please print this in a higher temp material like petg, and print it hot, I print petg at 255C for maximum strength. If your prints break along layer lines, then you're printing to cool. The screw holes are designed for a 4-40 socket head cap screw.

Let me know how it works for you and if you have failures, try to get pictures so I can redesign.

Thanks,
Don

25 spinner vented.jpg
 

Attachments

  • 25 spinner btm.STL
    760.4 KB · Views: 0
  • 25 spinner top.STL
    571.3 KB · Views: 0

Piva

New member
A request was made for this file to be mirrored. I usually mirror a file in the slicer, however here it is mirrored in case you don't have that option.
 

Attachments

  • 25 spinner btm mirror.stl
    1.3 MB · Views: 0

JVos

Member
Thanks again!
Did you have a vented version as well, I'd love to run some comparison tests on the spitfire.
John