4s 2208 on 6045 prop in Alpha?

[Captain J]

man thats an incredibly good looking plane

 

[Captain J]

i h

In this video I was using my 2306 Emax ECO II with a 50A esc and a 850mah 4S 65V on the Mini FT Mustang paired with a 5x4.3x3 prop.

i have actually seen this video before when referencing p51 to build.

just the ft plans?

 

[Houndpup Rc]

man thats an incredibly good looking plane

Thanks! (It was my first paint job)

 

[Houndpup Rc]

i h

i have actually seen this video before when referencing p51 to build.

just the ft plans?

Yup! I even had 9g metal gear servos.

 

[Mr Man]

wild. 4s, 2807.5, 6045 prop?

how much WOT you doing?

2207.5, not 2807. But I’ve only done 5 second bursts due to how far away it gets.

 

[Houndpup Rc]

2207.5, not 2807. But I’ve only done 5 second bursts due to how far away it gets.

That's how my NNSpitefire is!

 

[Houndpup Rc]

If You want POWER put this motor on 4S paired with a 7x7 prop on. Speeeed! (I have to get a video of mine sometime!)

PROPDRIVE v2 3536 1800KV Brushless Outrunner Motor

PROPDRIVE v2 motors are designed to perform right out of the box with tight windings, smooth bearings, correctly rated magnets, precision cut stator and balanced rotors.

hobbyking.com

 

[Piotrsko]

Man there's a lot of industry hype and wiggle words on that motor ad.

Like D'oh, but the motor won't run if you don't do most of the stuff they advertise
In the forever I have been doing this people that do this style make poor hardware for the dollars they charge

 

[Houndpup Rc]

If You want POWER put this motor on 4S paired with a 7x7 prop on. Speeeed! (I have to get a video of mine sometime!)

PROPDRIVE v2 3536 1800KV Brushless Outrunner Motor

PROPDRIVE v2 motors are designed to perform right out of the box with tight windings, smooth bearings, correctly rated magnets, precision cut stator and balanced rotors.

hobbyking.com

So far this motor has been good quality for me! And I like to put my motors thru the wringer!😂😂😂 Maybe that's why cheap china motors don't like me.......

Man there's a lot of industry hype and wiggle words on that motor ad.

Like D'oh, but the motor won't run if you don't do most of the stuff they advertise
In the forever I have been doing this people that do this style make poor hardware for the dollars they charge

 

[Mr Man]

Man there's a lot of industry hype and wiggle words on that motor ad.

Like D'oh, but the motor won't run if you don't do most of the stuff they advertise
In the forever I have been doing this people that do this style make poor hardware for the dollars they charge

What stuff do they advertise?

 

[Piotrsko]

They advertise in the motor description that wont copy pasta.

 

[Mr Man]

They advertise in the motor description that wont copy pasta.

I think they are just recommending that esc, just because it’s an 80a esc, any 80a esc should work for that motor.

 

[Piotrsko]

Lookin the small print directly under the banner. Starts with: Prop drive motors V2

 

[Mr Man]

Lookin the small print directly under the banner. Starts with: Prop drive motors V2

I believe they are just talking about that motor series. Every motor company I’ve seen does that.

 

[Mr Man]

Got the Video For the Arrow Done! Upwards of 115mph.

 

[Houndpup Rc]

Got the Video For the Arrow Done! Upwards of 115mph.

Wow! That baby is FAST! 9I think my NNspit is about that fast with a 7x7...haven't been able to try the 7x8 yet..)

 

[Mr Man]

Wow! That baby is FAST! 9I think my NNspit is about that fast with a 7x7...haven't been able to try the 7x8 yet..)

Cool! First pass looked fastest because I was lower in that one.

 

[Houndpup Rc]

Cool! First pass looked fastest because I was lower in that one.

Yeah. Looking forward to trying my Gopro Hero 10 with 5.3k footage!

 

[Mr Man]

Yeah. Looking forward to trying my Gopro Hero 10 with 5.3k footage!

Might put my action cam on the goblin…

 

[Houndpup Rc]

Might put my action cam on the goblin…

I don't trust my goblins! 😂 (At least with a camera that expensive!) Might put it on the Flerken when i make it.