Spastickitten
Senior Member
I was thinking of making a micro indoor quad and just need a place for others to put their info! ^-^
Hobbykings new products made for micro quads
Quanum Pico 32bit Brushed Flight Control board
Quanum WISP 110 micro multirotor frame
60mm Propeller Quad Set (4 pcs)
Mini Quad Brushed Motor 8x20mm (4 Pack)
Oscar Liang's ulimate write up
http://blog.oscarliang.net/fpv-micro-quad-beef-board/
Hovership's micro 3DFLY quad.
http://shop.hovership.com/3dfly-micro-quad-kit/
Peabody's board and frame
http://buildandcrash.blogspot.com/2015/03/brushedsparky-v02.html
This is a sparky 2 FC and frame with taulink system
Now sold Here!
Micro MWC FC with brushed escs and dsm2 reciever
http://www.hobbyking.com/hobbyking/...oard_DSM2_ESC_39_s_X4_Brushed_Integrated.html
Ultimate write up
http://www.rcgroups.com/forums/showthread.php?t=1993117
CJMCU fc and frame (no receiver)
seems to be pretty good, but no good sellers
http://blog.oscarliang.net/build-fpv-micro-quadcopter-smallest-quad/
Hasi's fc board with esc and flysky rx
http://flitetest.com/articles/small-indoors-fpv-quad-project
Micro motor Warehouse
Great place for motors, frames, and has a flight controller (Alienwii)
http://micro-motor-warehouse.com/
Micro brushed escs with naze mini
http://www.rcgroups.com/forums/showthread.php?t=2163400
They begin talking on post 357
http://www.rcgroups.com/forums/showthread.php?t=2163400&page=24
Hermit micro rtf brushless quad
http://www.getfpv.com/hermit-micro-fpv-brushless-quadcopter-rtf-nofpv.html
Some FPV parts
good camera
http://www.getfpv.com/lumenier-sm-600-super-mini-600tvl-wide-angle-camera.html
good 5.8 tx
http://www.getfpv.com/fpv/altituderc-nano-25mw-5-8ghz-fpv-video-transmitter.html
Flite Tests' micro 5.8 FPV module
http://flitetest.com/articles/diy-micro-5-8ghz-fpv
Hobbykings new products made for micro quads
Quanum Pico 32bit Brushed Flight Control board
Quanum WISP 110 micro multirotor frame
60mm Propeller Quad Set (4 pcs)
Mini Quad Brushed Motor 8x20mm (4 Pack)
Oscar Liang's ulimate write up
http://blog.oscarliang.net/fpv-micro-quad-beef-board/
Hovership's micro 3DFLY quad.
http://shop.hovership.com/3dfly-micro-quad-kit/
Peabody's board and frame
http://buildandcrash.blogspot.com/2015/03/brushedsparky-v02.html
This is a sparky 2 FC and frame with taulink system
Now sold Here!
Micro MWC FC with brushed escs and dsm2 reciever
http://www.hobbyking.com/hobbyking/...oard_DSM2_ESC_39_s_X4_Brushed_Integrated.html
Ultimate write up
http://www.rcgroups.com/forums/showthread.php?t=1993117
CJMCU fc and frame (no receiver)
seems to be pretty good, but no good sellers
http://blog.oscarliang.net/build-fpv-micro-quadcopter-smallest-quad/
Hasi's fc board with esc and flysky rx
http://flitetest.com/articles/small-indoors-fpv-quad-project
Micro motor Warehouse
Great place for motors, frames, and has a flight controller (Alienwii)
http://micro-motor-warehouse.com/
Micro brushed escs with naze mini
http://www.rcgroups.com/forums/showthread.php?t=2163400
They begin talking on post 357
http://www.rcgroups.com/forums/showthread.php?t=2163400&page=24
Hermit micro rtf brushless quad
http://www.getfpv.com/hermit-micro-fpv-brushless-quadcopter-rtf-nofpv.html
Some FPV parts
good camera
http://www.getfpv.com/lumenier-sm-600-super-mini-600tvl-wide-angle-camera.html
good 5.8 tx
http://www.getfpv.com/fpv/altituderc-nano-25mw-5-8ghz-fpv-video-transmitter.html
Flite Tests' micro 5.8 FPV module
http://flitetest.com/articles/diy-micro-5-8ghz-fpv
Last edited: