hey guys i hooked up my agm 2213 to a 20a little bee esci picked up on ebay for cheap, but it wont run on my receiver when i plug it up. ive tried both my fly sky and my futaba trans/reciver combos and no luck. is there some way i have to program the esc? i had a blheli20a that worked in anouther plane but i figured i try this one as it was cheaper.
agm 2213 on 20a little bee
- Thread starter billyhell
- Start date
Userofmuchtape&glue
Posted a thousand or more times
Does your esc have a BEC? IS the Rx powering on?
When you plug it in to your receiver,the receiver's light should come on. If it doesn't, you have no power. Check with a voltmeter between the brown (sometimes red) and black to see if you have 5v.
Note: If you connected the battery to the ESC the wrong way round, it wipes out the 5v.
Note: If you connected the battery to the ESC the wrong way round, it wipes out the 5v.
Similar threads
