• This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn more.

Aio fpv camera repair

Morgan

Active member
#1
I have a all in one micro fpv camera that I broke the antenna off of. I know that I cam find a tx for about 10$ but I'm not sure which wires go to which pin on the camera. 1550973834087451511991.jpg allso do I have to run power to the camera and vtx?
 

ElectriSean

Eternal Student
Mentor
#2
It would probably be easier to replace the antenna, but you can figure out what pin is what if you have a DC volt meter and don't mind potentially killing that VTx for good running it without the antenna.
 

Morgan

Active member
#3
It would probably be easier to replace the antenna, but you can figure out what pin is what if you have a DC volt meter and don't mind potentially killing that VTx for good running it without the antenna.
I would just replace the antenna but the solder pads broke off as well.
 

PsyBorg

Wake up! Time to fly!
Mentor
#5
I would ditch the brittle toy grade aio and upgrade to better less fragile gear.

Those aios barely work when new and do not get better after damage reapairs.

Save yourself the aggrivation. Look thru my gremlin build thread for proof of my aio nightmares.