Airplane scratch build project - Evangel 4500

The Hangar

Fly harder!
Mentor
Hey friends! At Flitefest 2019 I worked on a project a friend had designed. He drew out some plans and gave them to me. I translated them to foam board and tried to make it fly. Well, it didn’t. There were a number of issues:
1) it was heavy. I am usin 1808 motors on 3s, so I have plenty of power but more weight means you need more airspeed to keep it in the air.
2) since the motor nacells in the design are so low, you need a bit of down thrust to compensate for that. I didn’t have any making it loop upon launch. Fixed it there.
3) I had accidentally made my nacells slightly crooked, so my plane always wanted to pitch right.

I plan to redo the wing and leave the fuselage since i spent a while painting it and I’m pretty happy with how it turned out😉. The tail got a little banged up in transportation and storage, tho that will need some work too. I have the plans I used and will try to post them just in case anyone else wants to join along! (Please do!) It is a pretty small plane - just a tad bit smaller than the mini guinea pig.
CECEADA6-DC2A-4ACC-924B-A0B15FA26580.jpeg
243D0950-8734-40E7-B18D-0AE04C55B402.jpeg
3B80A3C6-3723-4DB3-89CC-7E867601134B.jpeg
34A5C7FF-4E55-4D9B-B8F7-D9809E3D12BC.jpeg
B8ECC95C-867B-4D45-9AAB-297E92768AF4.jpeg

NOTE: progress may be slow as I’m working on several other airplanes right now😂
 
Last edited:

Corbarrad

Active member
I really like the look and the design philosophy of the Evangel.
A rugged and minimalistic plane, purpose-built.
Interesting that the prototype was atricycle gear high wing while the production model turned up as a low wing tail dragger. Probably to make maintenance on the engines easier plus the increased angle of incidence will help with the STOL characteristics...

I think you captured the basic lines quite well. if I'd change anything off the top of my head I'd probably reduce the size of the aerodynamic balances on the tail plane and add to the stab surface instead, that will make it flex less and help with control. for the two-in one linkage neccessary for the twin elevator I would probaly invest in a linkage stopper to make setup easier.
Speaking of linkages, they look a bit long and floppy. you should probably secure them to the foam in a few places, or if CG allows move the servos farther back inside the fuselage.
 
Last edited:

The Hangar

Fly harder!
Mentor
They look like balsa plans, are they?
The guy who designed them hasn’t ever done a scratch build ft foam plane yet, so he had balsa in his mind I think... I just used the plans as templates and used the measurements of the formers, fuselage, tail, etc.
 

The Hangar

Fly harder!
Mentor
Well I built another wing as a typical ft fold-over wing as offside to the previous under-cambered wing and got the thrust angles right. It flew straight had an abundance of power. The pilot thought it stalled but looking back at the vid it looks like he lost orientation or something like that. He’s had over 40 years of experience in rc so I thought he might have more of a chance at success than me...
 

The Hangar

Fly harder!
Mentor
I am building a quarter scale Evangel, pictures to come sometime in a near future..

This is a serious project, not a toy... serious money has been invested in designing and the inicial building stages..
Awesome! Feel free to post your progress on this thread. Those are nitro motors, right? I’m really eager to see this project since from what I’ve seen, I’m the o ly one to have built an rc version. And mine had moderate success. Yes, it flew - but justa little. I plan on revisiting this project in the very near future for either a c pack twin or a monster radial twin! Good luck!
 

buzzbomb

I know nothing!
I am building a quarter scale Evangel, pictures to come sometime in a near future..

This is a serious project, not a toy... serious money has been invested in designing and the inicial building stages..
That's beautiful! I'm looking forward to any progress pictures you want to post up. What an exciting project!
 

Fintail

New member
The wing bend seems more reasonable than the first attempt.
 

Attachments

  • 20191226_165208.jpg
    20191226_165208.jpg
    4 MB · Views: 0
  • 20191226_165212.jpg
    20191226_165212.jpg
    4.1 MB · Views: 0
  • 20191226_165201.jpg
    20191226_165201.jpg
    4 MB · Views: 0

Fintail

New member
Made some good progress tonight. Here is the jig thingy I built to get the bend the same for both wings.
 

Attachments

  • 20191231_195235.jpg
    20191231_195235.jpg
    3.1 MB · Views: 0
  • 20191231_194350.jpg
    20191231_194350.jpg
    3.6 MB · Views: 0
  • 20191231_200239.jpg
    20191231_200239.jpg
    4.1 MB · Views: 0

Fintail

New member
Wing bendy thingy and the mostly completed wing. Still gotta make wing tips.
 

Attachments

  • 20191231_200738.jpg
    20191231_200738.jpg
    4.1 MB · Views: 0
  • 20191231_200804.jpg
    20191231_200804.jpg
    4.1 MB · Views: 0

Fintail

New member
Making the best out of these poor cuts.
 

Attachments

  • 20191231_201237_HDR.jpg
    20191231_201237_HDR.jpg
    1,017.1 KB · Views: 0
  • 20191231_201231.jpg
    20191231_201231.jpg
    1.3 MB · Views: 0
  • 20191231_201248.jpg
    20191231_201248.jpg
    1.1 MB · Views: 0
  • 20191231_201244.jpg
    20191231_201244.jpg
    1.4 MB · Views: 0

Fintail

New member
Made the vertical stab and rudder. Glued two pieces of foam board together and sanded to shape. Glued pieces of sand paper between the pieces to use as hinges and they work great. @The Hangar, you missed out on some fun building today!
20191231_221729.jpg
20191231_221557.jpg
20191231_215047(1).jpg
20191231_215047.jpg
20191231_214256.jpg
20191231_221454.jpg
20191231_223217.jpg
20191231_214256.jpg