aluminum plane

victorfrankl

New member
golfConpletes.jpg

Most golfers would agree that speeding up Rate of play makes the Match, and their time on the hyperlinks, more pleasurable. And they understand the quicker they perform their way through nine or 18 holes, the more golf clubs they could squeeze into their busy lives. To help golfers undergo their rounds faster, Leupold, the Official rangefinder of the American Junior Golf Association and national sponsor of the AJGA's Pace of Play program, offers these five tips that anyone can quickly employ.
https://medium.com/@topgolfrangefinder_78896/how-to-choose-the-best-golf-range-finder-acfa9fb6b4d7
Play when ready. Prior to beginning a round, make sure everybody In your group understands that they should reach when prepared.During the round, invite fellow golfers to proceed when prepared. If you are the first to complete a hole, then walk ahead to thenext tee shirt and prepare to hit. Play immediately. If you wear a glove, put it on until you arrive In your own ball.
When you have the space and you're ready, take no longer than 20 minutes to hit the shot. When others are hitting, particularly on the putting green, utilize the opportunity to analyze and organize your next shot to lessen the delay. When you arrive in the putting green, mark your ball then lift and washit so you'll be ready to replace it if it's your turn to perform. Play helpfully. Follow the flight of all tee shots in your class And help identify ball locations.
Once in the fairway, assistothers start looking for their balls in case you already know the positioning of yours and are able to remain in place to playyour next shot . Search for opportunities to keep the team moving efficiently by means of fill in a divot, rake a bunker or areinclined to the flagstick for others as needed. Play on. Leave the green as quickly as possible after holing out. To save time, park carts from the green, or place your clubs onthe side of the green closest to the next tee. Wait until the next tee shirt to record your score.
https://twitter.com/golfrangefinde3
Play using a rangefinder. Constantly Searching for sprinkler heads Or alternative yardage markers slows the group down. Save time by carrying out a laser rangefinder, like one of Leupold's GX models, which provides rapid, precise distance measurements from any where on the course.
For more rangefinder info. It remains important to keep security in mind in Any Way times and to Have regard for other gamers by not interfering with their games, but moving at a brisk pace can produce the round even more enjoyable and allow for more golf clubs in the long run. About Family Features Editorial Syndicate Launched in 1974, Family Features is a top provider of free food and lifestyle content for Print and internet books. Our articles, photographs, videos and web content Solutions save you time, money and help create advertising opportunities.
Read more
 
Last edited:

kdobson83

Well-known member
And very hard. Alluminum is light for full scale, but rc is a different story. An all alluminum FT Storch for example could weigh as much as 15 lbs. I don't see a 10-15 lbs FT Storch flying very well if at all.
 

jaredstrees

Well-known member
You could skin it in aluminum, but be careful because that can block radio signals. These is also metallic tape (and easier to use than aluminum) if you are looking for a shiny finish. Just make sure your antennas are exposed!
 

quorneng

Master member
victor
The problem is that aluminium construction does not scale well, particularly when you consider strength of any component in compression.
If you take something like a aluminium wing rib which might be 0.8 mm thick. It will be capable of resisting both tensile and comprssion forces.
Scale this down by say 1/6 and it will be 0.13 mm thick.
Unfortunately the ability of any structure to resist buckling (the most likely failure when in compression) drops by roughly the square of the material thickness. As a result a rib of the correct scale weight it will have far less than the scale strength.
At small sizes there are much better materials than aluminium to achieve a suitable strength to weight ratio which is really important as the lift created by a wing travelling thought the air does not directly scale either!;)