Another Reason so Love Turnigy Plush

Ak Flyer

Fly the wings off
Mentor
I didn't read through all of it but could someone give me the short version of why you would do this? Is it just for multicopters or can plane and heli pilots benefit from this?
 

Johntra

Senior Member
No it is a Firmware that was made specifically for Multicopters but there is no reason that it wouldn't work with any kind of application.
 

voipmonkey

Senior Member
i have also been looking at the open pilot copter board looks really good and the videos on the test rig they had was super stable.
check out the video on the open pilot tv EP1
Mark

 

voipmonkey

Senior Member
Interesting read !! here comes the but... But I thought the Turnigy plush 18a esc are already programmed to take the higher PWN rate so what's the point. I guess is your quad or tri bounces like the videos then a must but if you get smooth flight why bother?
being a fiddler I might get hold of some cheep HK esc and have a go just for the fun of it. :cool:
 

Johntra

Senior Member
i have also been looking at the open pilot copter board looks really good and the videos on the test rig they had was super stable.
check out the video on the open pilot tv EP1
Mark


Yeah too bad they don't make the CC board anymore. And they have no idea when they are going to finish developing the new CC3D board... sad face. I so want one.
 

voipmonkey

Senior Member
:( i did not know they had stopped making them wondered why they are all out of stock all the time :(
will have to keep an eye out for the CC3D i had on of the cc board on my birthday list ;)
 

Johntra

Senior Member
:( i did not know they had stopped making them wondered why they are all out of stock all the time :(
will have to keep an eye out for the CC3D i had on of the cc board on my birthday list ;)

Yeah i didn't either. They just anounced it yesterday its also nicknamed the revolution (revo). I'll either have to wait till it comes out or try to pick one up used, which seems to be almost imposible. Or I could dish out some extra cash and go with something like the quadrino. I'd like someones opinion on that accually which is better the openpilot CC or the Quadrino.
 

voipmonkey

Senior Member
Yeah i didn't either. They just anounced it yesterday its also nicknamed the revolution (revo). I'll either have to wait till it comes out or try to pick one up used, which seems to be almost imposible. Or I could dish out some extra cash and go with something like the quadrino. I'd like someones opinion on that accually which is better the openpilot CC or the Quadrino.

Wow just checked pricing on this and one i found in Sweden was $300.
don't think the budget can stretch that far :(
 

Non Action Man

Nose Landing Specialist
But I thought the Turnigy plush 18a esc are already programmed to take the higher PWN rate so what's the point.

What I took away from it was that it effects the output change rate. So instead of going from 10% to 50% over say 1 second (no idea how long its really takes) it just changes to the new output speed.