Anybody else scratch building tonight?
- Thread starter K3V0
- Start date
Brian B
Elite member
I got here too late. Recognized that kink in the intake -to-delta transition immediately. Sweet! Posting plans when done? Power train?
akimbo
Active member
I will try my best to post the plans but I honestly have no idea if it will fly. I might have to scale up the wings. If it does fly, it is going to be a rocket, considering that the fan barely fits in the fuselage. Also, the intakes might be too small.
The Fopster
Master member
I’d say the intakes are definitely too small. But that’s fine - you can cut a cheat hole underneath or on top. Here’s a couple of examples - these are commercial balsa kit designs and they use cheat holes to get enough performance out of the fan.
luvmy40
Elite member
That looks fantastic!
The prop looks tiny though. Is it going to have enough thrust?
skymaster
Elite member
nice plane was just looking at it and the shape. what do you think it would happen if you close the gap between the wings and the elevator?
Brian B
Elite member
Wondering the same thing. Just going by the plans. We'll see.
AgentC
Elite member
Introducing the EZ Punjet. It's a thing...
Will work on some plans to get this up to EZ spec.
Some notes though: I experimented with the v2 props after one v1 prop randomly broke mid-flight, and I must say, they blow the v1's out of the water. Much, MUCH quieter and the performance is markedly better, too.
If you still have some v1 power packs lying about, do yourself a solid and swap out the props with at least the v2's.
On a different side-note, I purchased some 8520 coreless motors from Amazon and although they don't fit into the EZ motor mounts, I chucked them into an EZ Sparrow and wow, the performance is also absolutely crazy. Now I'm just waiting on some Gemfan props to see if they can make it fly even better... Watch this space.
Will work on some plans to get this up to EZ spec.
Some notes though: I experimented with the v2 props after one v1 prop randomly broke mid-flight, and I must say, they blow the v1's out of the water. Much, MUCH quieter and the performance is markedly better, too.
If you still have some v1 power packs lying about, do yourself a solid and swap out the props with at least the v2's.
On a different side-note, I purchased some 8520 coreless motors from Amazon and although they don't fit into the EZ motor mounts, I chucked them into an EZ Sparrow and wow, the performance is also absolutely crazy. Now I'm just waiting on some Gemfan props to see if they can make it fly even better... Watch this space.
Last edited:
RossFPV
Well-known member
Soon you will beat the cars on the highway 😁
voyhager3
Active member
Update to my last post:
To combat the latter, I’ll dam the whole area, but add some air channels to cool the motor and esc. And maybe run it less at full throttle.
It definitely helped, but needed to be secured better. But it also caused other problems with there was now a smaller area for the air to flow through because it still could get through, just not as well. So there was also the reduced cooling.
To combat the latter, I’ll dam the whole area, but add some air channels to cool the motor and esc. And maybe run it less at full throttle.
Similar threads
