Joseph Lever
Member
Hi,
I have bought some bullet connectors for my motor and ESC but I'm wondering if they are too small
I have had an XT60 connector on my 3D printer melt because it had a high resistance and I don't want
anything like that happening again I have attached a photo below of the connectors and a pencil for scale.
Also I have a Turnigy plush 30a ESC and I was coing to pair it with this battery: https://hobbyking.com/en_us/turnigy...304&indexName=hbk_live_magento_en_us_products
But there are some 3 cells that say they are 30c but this one says 40c what does this mean and will this battery work with my ESC?
Also on the Internet it says my motor is 1400kv but on the motor it says 1000kv but the model numbers are the same is this ok?
Thanks
I have bought some bullet connectors for my motor and ESC but I'm wondering if they are too small
I have had an XT60 connector on my 3D printer melt because it had a high resistance and I don't want
anything like that happening again I have attached a photo below of the connectors and a pencil for scale.
Also I have a Turnigy plush 30a ESC and I was coing to pair it with this battery: https://hobbyking.com/en_us/turnigy...304&indexName=hbk_live_magento_en_us_products
But there are some 3 cells that say they are 30c but this one says 40c what does this mean and will this battery work with my ESC?
Also on the Internet it says my motor is 1400kv but on the motor it says 1000kv but the model numbers are the same is this ok?
Thanks
Last edited: