Help! Aura 5 SRXL2 Setup and Telemetry Tuning

[Hvon11]

I just updated my Spektrum DX6 to Airwave version 2.0.7.03 and the TextGen telemetry option has been eliminated. I do see the Aura 5 on the DX6 monitor and can see the gain settings for all 3 Flight Modes. However, I can’t get into the Aura 5 tune mode by flipping the Flight Mode switch 3 to 4 times quickly that worked previously. I had to mount the Aura 5 in such a way that I can’t get to the mini usb port to do configures with a PC, so doing it from the DX6 is essential.
Aura 5 is updated to firmware version 1.4
Spektrum SRXL2 Satellite SPM4650

Any ideas?

 

[Hvon11]

I just updated my Spektrum DX6 to Airwave version 2.0.7.03 and the TextGen telemetry option has been eliminated. I do see the Aura 5 on the DX6 monitor and can see the gain settings for all 3 Flight Modes. However, I can’t get into the Aura 5 tune mode by flipping the Flight Mode switch 3 to 4 times quickly that worked previously. I had to mount the Aura 5 in such a way that I can’t get to the mini usb port to do configures with a PC, so doing it from the DX6 is essential.
Aura 5 is updated to firmware version 1.4
Spektrum SRXL2 Satellite SPM4650

Any ideas?

Figured it out. I have to toggle the 3 pos flight mode switch through all three positions fairly quickly. A bit of pain but it works.

 

[3D-Seth]

Make sure the TX binds with Telemetry, noted on the transmitter screen when binding.

Once thats done, go to the Telemetry menu, and select "Auto-Config". That should add the text gen screen if all else is working properly.

 

[Hvon11]

Make sure the TX binds with Telemetry, noted on the transmitter screen when binding.

Once thats done, go to the Telemetry menu, and select "Auto-Config". That should add the text gen screen if all else is working properly.

That worked. Thanks for the response. Love the Aura 5. Love the DX6.