Baby Blender vs Se5

[Raxaphone]

Help me compare the Se5 to the Baby Blender. I want to know specifics, which is easier to fit electronics in, which is more forgiving, details. Thanks!

 

[Jo's squadron]

Help me compare the Se5 to the Baby Blender. I want to know specifics, which is easier to fit electronics in, which is more forgiving, details. Thanks!

Baby blender flies much better and is overall easier.

 

[Raxaphone]

Baby blender flies much better and is overall easier.

Thanks! How well would it fly on an 1806?

 

[Jo's squadron]

Thanks! How well would it fly on an 1806?

Very bad if you don't scale it down to 65-70%

 

[Jo's squadron]

I did scale down the baby blender to 70% and it flew pretty good!

 

[Raxaphone]

Very bad if you don't scale it down to 65-70%

Alright, I do have a 2206 1000kv so I'll probably just use that then

 

[Jo's squadron]

Alright, I do have a 2206 1000kv so I'll probably just use that then

Still a bit small for the full size one

 

[Mr Man]

Alright, I do have a 2206 1000kv so I'll probably just use that then

Still a bit small for the full size one

Yup, minimum imo would be a 2210.

 

[Raxaphone]

How much should I scale it down for the 2206 then?

 

[Mr Man]

How much should I scale it down for the 2206 then?

Problem is, that’s a low kv motor, generally you’d want a small prop spinning fast to get the thrust, but yours won’t spin fast enough for a small prop but isn’t powerful enough for a bigger prop.

 

[Raxaphone]

Problem is, that’s a low kv motor, generally you’d want a small prop spinning fast to get the thrust, but yours won’t spin fast enough for a small prop but isn’t powerful enough for a bigger prop.

So either get a new motor or scale it down enough for the 1806

 

[Houndpup Rc]

So either get a new motor or scale it down enough for the 1806

Maybe just scale it down to 85%. What do you think @Jo's squadron and @Mr Man ?

 

[Mr Man]

Maybe just scale it down to 85%. What do you think @Jo's squadron and @Mr Man ?

Hmm, the 1806 has a little under half the thrust of Power Pack C, and scaling it down that much would result in a horrible flying plane.

 

[Raxaphone]

I woke up this morning and suddenly remembered I have a 2212 1200kv, not a 2206 1000kv. Not sure where I even got that first idea from. How does this change things @Jo's squadron @Mr Man @Houndpup Rc

 

[Raxaphone]

Its still too small of a motor, but it's a higher kv than the pack C 2218 and not quite as small at a 2206 would be

 

[Mr Man]

I woke up this morning and suddenly remembered I have a 2212 1200kv, not a 2206 1000kv. Not sure where I even got that first idea from. How does this change things @Jo's squadron @Mr Man @Houndpup Rc

That’s a power pack B motor, which the Baby Blender can use, so there ya go! 10x4.5 Prop should do well on 3s. Post pics if you build it! (If you want)

 

[Raxaphone]

That’s a power pack B motor, which the Baby Blender can use, so there ya go! 10x4.5 Prop should do well on 3s. Post pics if you build it! (If you want)

I only have 8060's, are they adequate?

 

[Mr Man]

I only have 8060's, are they adequate?

They should work well.

 

[Raxaphone]

They should work well.

Alrighty, I'll post the finished build as soon as it's done once I get around to it. Thanks all!

 

[Jo's squadron]

I woke up this morning and suddenly remembered I have a 2212 1200kv, not a 2206 1000kv. Not sure where I even got that first idea from. How does this change things @Jo's squadron @Mr Man @Houndpup Rc

that would work good!