Babyhawk Camera/VTX wiring

Enos Shenk

New member
Hey guys,

So I finally got around to ordering a Gremlin, and I went with the Babyhawk camera/VTX option. But uh, the camera doesn't seem to come with a plug or wiring harness. It was just the camera unit in a static bag with nothing else.

IMG_0558.JPG

So can anyone tell me how the hell to use this thing? I contacted FT support asking, but haven't heard anything back. I'd be happy with just a pinout.

Does anyone have this camera setup with the actual wiring plug and can tell me or give a picture of it?
 

JDill

Member
Here you go. As viewed on a Babyhawk from the front with connector on the bottom, left to right: +v (red), common (black), empty, empty, yellow wire jumpers the two right pins.
 

Attachments

  • DSCN0870.JPG
    DSCN0870.JPG
    1.7 MB · Views: 1

JamesWhom

Project Air on YouTube
I'm in the same boat but don't know how to unsolder the plug :( Anyone know where I can pick up a lead for this little thing? I'd ideally like to run it directly off an Rx like my other micro fpv cam.

IMG_4173.JPG

It would be great if I could just solder one of these servo lead style things to it like this other cam has.

IMG_4174.JPG

Any help would be appriciated!