Hi everyone,
I recently bought a BatBon Tri 370 Kit and need your suggestions or some hints for the fitting. I already watched the beginner episodes (yes I'm quite a noob) about the power setup, batteries and a lot of other ones about multicopters (love your show). That results in the following fitting and some questions (e.g. the receiver).
High Slots: (quite sure)
- 3 x Turnigy Park300 Brushless Outrunner 1380kv
- 3 x Turnigy Multistar 15 Amp Multi-rotor Brushless ESC 2-3S
- 3 x 8045 SF Props 2pc Standard Rotation/2 pc RH Rotation (green)
Mid Slots: (not sure about the receiver)
- HobbyKing KK2.1 Multi-rotor LCD Flight Control Board with 6050MPU and Atmel 644PA
- OrangeRx R620 Spektrum/JR DSM2 Compatible Full Range 6Ch 2.4Ghz Receiver w/Failsafe (US)
Low Slots: (quite sure)
- 3 x Turnigy 2200mAh 3S 25C Lipo Pack
Transmitter: (quite sure)
DX6i DSMX 6 Channel Full Range
Any thoughts or suggestions? Do I need any additional parts (wires, connectors, etc.)?
Thank you in advance & greetings from Austria
@Admins: I'm not sure if this is the correct place for my thread. Please move it, if not.
I recently bought a BatBon Tri 370 Kit and need your suggestions or some hints for the fitting. I already watched the beginner episodes (yes I'm quite a noob) about the power setup, batteries and a lot of other ones about multicopters (love your show). That results in the following fitting and some questions (e.g. the receiver).
High Slots: (quite sure)
- 3 x Turnigy Park300 Brushless Outrunner 1380kv
- 3 x Turnigy Multistar 15 Amp Multi-rotor Brushless ESC 2-3S
- 3 x 8045 SF Props 2pc Standard Rotation/2 pc RH Rotation (green)
Mid Slots: (not sure about the receiver)
- HobbyKing KK2.1 Multi-rotor LCD Flight Control Board with 6050MPU and Atmel 644PA
- OrangeRx R620 Spektrum/JR DSM2 Compatible Full Range 6Ch 2.4Ghz Receiver w/Failsafe (US)
Low Slots: (quite sure)
- 3 x Turnigy 2200mAh 3S 25C Lipo Pack
Transmitter: (quite sure)
DX6i DSMX 6 Channel Full Range
Any thoughts or suggestions? Do I need any additional parts (wires, connectors, etc.)?
Thank you in advance & greetings from Austria
@Admins: I'm not sure if this is the correct place for my thread. Please move it, if not.
