So some of you might have been following my other thread reference my tri to quad conversion. I keep running into snags and finally have everything almost figured out. However, I am still have slight issues with a couple of things and would like to know if I am on the right track.
I am running a 3 cell 2800 mha battery that is rated for 30c. Since I added the forth motor the throttle feels really sluggish and when I push the thing to max it sounds like low RPMs. I have calibrated the RX so it is definitely getting full throttle to the unit. This was not an issue when running 3 motors.
So here is the config.
4 X DT700 motors
4 X 20a hobbyking ESCs
4 X 10x6 props
I have a higher C 4s battery available but these DT700s are not rated for it.
Am I on the right track of narrowing my issues down to the battery???
I am running a 3 cell 2800 mha battery that is rated for 30c. Since I added the forth motor the throttle feels really sluggish and when I push the thing to max it sounds like low RPMs. I have calibrated the RX so it is definitely getting full throttle to the unit. This was not an issue when running 3 motors.
So here is the config.
4 X DT700 motors
4 X 20a hobbyking ESCs
4 X 10x6 props
I have a higher C 4s battery available but these DT700s are not rated for it.
Am I on the right track of narrowing my issues down to the battery???