Beechcraft Baron G58

Beechcraft Baron G58 2019-04-07

Please log in to download

liquidsky

New member

Attachments

  • air intake cardboard cover.dxf
    2.1 KB · Views: 0
  • air intake.dxf
    8.2 KB · Views: 0
  • bottom fuselage plate.dxf
    3.7 KB · Views: 0
  • bottom inside former.dxf
    5 KB · Views: 0
  • bottom motor mount formers cover cardboard.dxf
    2.1 KB · Views: 0
  • bottom outside former.dxf
    5.1 KB · Views: 0
  • dihedral gauge.dxf
    2.4 KB · Views: 0
  • doubler inside.dxf
    6.4 KB · Views: 0
  • doubler outside.dxf
    4.8 KB · Views: 0
  • elevator.dxf
    23.8 KB · Views: 0
  • equipement plate.dxf
    5.5 KB · Views: 0
  • firewall.dxf
    3.4 KB · Views: 0
  • fuselage front top.dxf
    2.6 KB · Views: 0
  • fuselage stiffener.dxf
    2.8 KB · Views: 0
  • fuselage.dxf
    22.7 KB · Views: 0
  • hatch centre brace.dxf
    2.2 KB · Views: 0
  • hatch paper cover.dxf
    2.3 KB · Views: 0
  • hatch.dxf
    12 KB · Views: 0
  • horizontal nose former.dxf
    10.2 KB · Views: 0
  • motormount 1.dxf
    19.4 KB · Views: 0
  • motormount 2.dxf
    18.3 KB · Views: 0
  • motormount top cover plate.dxf
    3.9 KB · Views: 0
  • nose end plate.dxf
    4.2 KB · Views: 0
  • nose joiner.dxf
    6.1 KB · Views: 0
  • nose plate.dxf
    17.1 KB · Views: 0
  • nose side plate 2.dxf
    17 KB · Views: 0
  • nose side plate.dxf
    17.8 KB · Views: 0
  • plywood spar joiner.dxf
    3.2 KB · Views: 0
  • powerpod 1.dxf
    7.6 KB · Views: 0
  • powerpod 2.dxf
    8.1 KB · Views: 0
  • rear top plate.dxf
    3.7 KB · Views: 0
  • rudder.dxf
    10 KB · Views: 0
  • spar 1.dxf
    7.7 KB · Views: 0
  • spar 2.dxf
    4.6 KB · Views: 0
  • wing 2.dxf
    16.6 KB · Views: 0
  • Wing support.dxf
    3.2 KB · Views: 0
  • wing.dxf
    11.5 KB · Views: 0
Last edited:

Jorge Pi

New member
Hello, how does it flies? It looks great and I would like to take a look at those DXF files.
Regards
 

jross

Well-known member
Nice job. I love this style of plane. The nacelles you designed are beautiful. I'm a big fan of Beechcraft planes in general.

The Bonanza is a favourite of mine. A buddy owned one I took several flights in. Shortly after my last flight with him, he had an engine failure in southern Alberta and put it down in a farmer's field. Unfortunately, there were 900 pound bales of hay in his path he'd hoped to clear. Pointed the fuselage between two of the bales as he touched down and sheared off both wings. He and his two kids were lucky to survive.

Thank for giving this to the community.
 

liquidsky

New member
Nice job. I love this style of plane. The nacelles you designed are beautiful. I'm a big fan of Beechcraft planes in general.

The Bonanza is a favourite of mine. A buddy owned one I took several flights in. Shortly after my last flight with him, he had an engine failure in southern Alberta and put it down in a farmer's field. Unfortunately, there were 900 pound bales of hay in his path he'd hoped to clear. Pointed the fuselage between two of the bales as he touched down and sheared off both wings. He and his two kids were lucky to survive.

Thank for giving this to the community.

Hi. Thanks for your kind words.
 

Synergy.5

New member
Almost done building.
Awesome design, thanks for sharing!
 

Attachments

  • image.jpg
    image.jpg
    2.1 MB · Views: 0