Bricks
Master member
Merv noticed I had put up a post that on some of my cheaper electric outrunner motors I have bent the shaft and could not find replacements. In a PM Merv was going to tell me how to make my own but then he came up with the bright idea.. I would put up a post so the entire community would get a chance to learn how to make there own and get more input from the group.
So here it is Merv have at it as I have several motors from 3MM shafts to 5MM
So here it is Merv have at it as I have several motors from 3MM shafts to 5MM