Help! Bigger Motor for the C pack

Houndpup Rc

Legendary member
I wonder if it would be one that would burn out pretty quick:unsure:
Then again there these which are closer in weight.
 

Mr Man

Mr SPEED!
Then again there these which are closer in weight.
I’m not sure.
 

Mr Man

Mr SPEED!
Do you think that this would be a good choice for a Master series Mustang?
For sure, as long as you’ve got a 70a esc or more. If you do, start with a 9x9 on 4s, and if good 10x9 or 10x10
 

Patriot Rc

Active member
I got everything cut out for the master series mustang (6 Hours of cutting) Ready for the 2025 FLITE TEST FORUM CHALLENGE: BUILD - RUARY CONTEST

 

Attachments

  • IMG_1505.JPG
    IMG_1505.JPG
    4.3 MB · Views: 0

FlyingWithRyan

Elite member
And where do the wing servos go?
I made a cut in the side of the fuselage where the the wing goes that followed the profile of the wing. I just hot glued mine in place with a LOT of glue. And yes DIY battery hatch. I embedded the aileron servos in the wing skin as well, but I believe Nate originally planned them to go underneath where the wing and fuselage join.